Building owners in St. Louis could save at least $61.5 million annually by improving energy efficiency in their buildings, according to the city’s first annual Building Energy Benchmarking Report & Checklist to Explore Energy Savings Opportunities report.
If building owners, including the city, made efficiency upgrades, greenhouse gas emissions could be reduced by at least 11%, the report says. The calculations apply to municipally-owned and operated buildings, as well as private buildings greater than 50,000 sf. According to the City’s 2015 Greenhouse Gas Inventory, energy used in commercial, industrial, and residential buildings in St. Louis is responsible for 77% of the city’s greenhouse gas emissions.
Along with the benchmarking report, the city released a new energy efficiency checklist that was developed in conjunction with the U.S. Green Building Council-Missouri Gateway Chapter. The checklist provides recommended steps for saving energy in buildings and investing in building maintenance staff.
“We hope the energy efficient checklist, combined with education and training opportunities, utility incentives and PACE financing, will drive investments in the efficiency of our buildings and reduce their environmental impacts,” said Emily Andrews, Executive Director of the U.S. Green Building Council-Missouri Gateway Chapter, in a news release.
Related Stories
| Jan 16, 2013
New standard for geothermal heat pump systems piping to be included in 2015 International Mechanical Code
NSF International, an independent global organization that writes standards, and tests and certifies products, has published the first in a series of American National Standards for Ground-Source Geothermal Piping Systems – NSF/ANSI 358-1.
| Jan 16, 2013
ANSI passes new safety standards for reinforcing steel and post-tensioning
The ANSI A10 Accredited Standards Committee for Construction and Demolition Operations recently approved amendments to the ANSI A10.9 Concrete and Masonry Standard.
| Jan 8, 2013
Congress passes Drywall Safety Act
Congress recently passed the Drywall Safety Act; President Barack Obama is expected to sign it soon.
| Jan 8, 2013
Building-integrated PVs could help boost green standards over the next few years
A developing technology could begin to have an impact on sustainable standards over the next few years.
| Jan 8, 2013
Revamp of codes among nine low tech steps to raise community resiliency
Updating of local zoning and building codes is one of nine low-tech steps that can boost sustainability and storm resiliency, according to this article.
| Jan 8, 2013
Group releases safety and building codes from 24 countries
Public.Resource.Org released 10,062 public safety documents including building codes covering 24 countries and 6 regions.
| Jan 8, 2013
Montana developing high-performance building standards for state projects
The Montana Department of Administration is developing a single building standard for all state facilities, and hopes to have a plan in place this spring.
| Jan 4, 2013
AGC economist says "fiscal cliff" deal will give construction a boost
The deal in Congress to avoid going over the so-called fiscal cliff "should encourage many businesses to go ahead with projects they have held in reserve," said Ken Simonson, chief economist of the Associated General Contractors of America.
| Jan 4, 2013
California standards on furnishings, insulation to be revised
California is revising the state’s standards on interior furniture and insulation to maintain or improve fire safety while reducing or eliminating the use of toxic chemicals.
| Jan 4, 2013
Tilt-Up Concrete Association releases new temporary wind bracing guidelines
The Tilt-Up Concrete Association has released revised guidelines on Temporary Wind Bracing of Tilt-Up Concrete Panels During Construction.
