Building owners in St. Louis could save at least $61.5 million annually by improving energy efficiency in their buildings, according to the city’s first annual Building Energy Benchmarking Report & Checklist to Explore Energy Savings Opportunities report.
If building owners, including the city, made efficiency upgrades, greenhouse gas emissions could be reduced by at least 11%, the report says. The calculations apply to municipally-owned and operated buildings, as well as private buildings greater than 50,000 sf. According to the City’s 2015 Greenhouse Gas Inventory, energy used in commercial, industrial, and residential buildings in St. Louis is responsible for 77% of the city’s greenhouse gas emissions.
Along with the benchmarking report, the city released a new energy efficiency checklist that was developed in conjunction with the U.S. Green Building Council-Missouri Gateway Chapter. The checklist provides recommended steps for saving energy in buildings and investing in building maintenance staff.
“We hope the energy efficient checklist, combined with education and training opportunities, utility incentives and PACE financing, will drive investments in the efficiency of our buildings and reduce their environmental impacts,” said Emily Andrews, Executive Director of the U.S. Green Building Council-Missouri Gateway Chapter, in a news release.
Related Stories
Codes and Standards | May 7, 2018
Plan advances in Los Angeles for Climate Emergency Mobilization Department
Would oversee efforts to reduce greenhouse gas emissions across the city.
Codes and Standards | May 3, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 2, 2018
Energy Department releases Updated EnergyPlus and OpenStudio building energy modeling tools
The tools can now accept input in epJSON format.
Codes and Standards | May 1, 2018
ASHRAE publishes new energy simulation-aided design standard
Requires building energy modeling during schematic design.
Codes and Standards | Apr 30, 2018
CALGreen projects pre-approved for streamlined LEED v4 requirements
Reduces need to run additional energy models.
Codes and Standards | Apr 26, 2018
New standard supports community resilience
ASTM International guidance supports cost-effective ways to withstand and recover from disasters.
Codes and Standards | Apr 25, 2018
Lessons learned from decades of Superfund cleanups guide contaminated land reuse
Sites repurposed for residential, commercial use, and solar energy generation.
Codes and Standards | Apr 24, 2018
Vibrant downtown core the key for urban multifamily development
Nighttime activity makes the difference.
Codes and Standards | Apr 19, 2018
ILFI launches new Zero Carbon Certification
Offers greater flexibility around project fuel types and offsetting renewables.
Codes and Standards | Apr 18, 2018
New Green Globe pilot program launched
Precursor to revised Green Globes Assessment Protocol for Commercial Buildings.