flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Specification for sliding door, lift and slide roller assemblies updated

Codes and Standards

Specification for sliding door, lift and slide roller assemblies updated

Addresses market trend toward heavy sliding doors.


By Peter Fabris, Contributing Editor | April 5, 2021

Courtesy Pixabay

The Fenestration and Glazing Industry Alliance (FGIA) released an updated version of a document pertaining to roller assemblies, with or without height adjustment features, for use in sliding doors and lift and slide doors.

AAMA 906-21, Specification for Sliding Door and Lift and Slide Roller Assemblies, was last updated in 2018. “The AAMA 906 task group made quick work of an important update to capture a market trend toward heavy sliding doors,” said Matt Taylor (HOPPE North America), co-chair of the FGIA Heavy Duty Roller Assembly Task Group.

“Previous requirements for operating force considered rollers with rated weight capacities to 100 pounds,” Taylor said. “Now, roller assemblies ranging from weight capacities of 75 pounds to more than 600 pounds will be tested to proportionate levels of operating force.”

Under the updated specification, representative samples of door rollers are evaluated for performance at the weight rating specified by the roller manufacturer by cycling the rollers under load for 10,000 cycles. Clearance and operating force measurements are taken before and after the cycle test to ensure performance remains within specified tolerances.

Related Stories

Codes and Standards | Sep 26, 2019

San Jose’s new building energy code is the most stringent among large cities

New regulations aim to make zero-emission electric buildings the norm.

Codes and Standards | Sep 26, 2019

Building support for climate action depends on linking it to health, economic benefits

USGBC report finds most people don’t think environmental problems significant enough to prioritize action.

Codes and Standards | Sep 20, 2019

OSHA has a new chief for its construction directorate

Former Army medical staffer Scott Ketcham has extensive OSHA experience.

Codes and Standards | Sep 20, 2019

American Wood Council updates free Connection Calculator

Tool includes cross-laminated timber connection provisions and post-frame ring shank nails.

Codes and Standards | Sep 19, 2019

Virtual reconnaissance of Bahamas finds some structures performed well during Dorian

Amid devastation, lives likely saved by resilient buildings.

Codes and Standards | Sep 19, 2019

Obama-era Waters of the U.S. rule revoked

New rule expected to define protected waterways more narrowly.

Codes and Standards | Sep 17, 2019

California will enact rent cap bill limiting rent increases to 5% plus inflation

Applies to apartments built at least 15 years ago.

Codes and Standards | Sep 17, 2019

Zero energy buildings can be constructed with no added upfront cost

ROI can be realized in as little as one year.

Codes and Standards | Sep 13, 2019

Researchers use U. of Arkansas buildings as testbed for CLT panels

Investigation could influence future use of the materials.

Codes and Standards | Sep 13, 2019

At least 30 U.S. cities have adopted stricter building energy codes since 2017

Some followed their states in implementing more robust standards.

boombox1
boombox2
native1

More In Category


Resiliency

U.S. is reducing floodplain development in most areas

The perception that the U.S. has not been able to curb development in flood-prone areas is mostly inaccurate, according to new research from climate adaptation experts. A national survey of floodplain development between 2001 and 2019 found that fewer structures were built in floodplains than might be expected if cities were building at random.



halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021