flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Specification for sliding door, lift and slide roller assemblies updated

Codes and Standards

Specification for sliding door, lift and slide roller assemblies updated

Addresses market trend toward heavy sliding doors.


By Peter Fabris, Contributing Editor | April 5, 2021

Courtesy Pixabay

The Fenestration and Glazing Industry Alliance (FGIA) released an updated version of a document pertaining to roller assemblies, with or without height adjustment features, for use in sliding doors and lift and slide doors.

AAMA 906-21, Specification for Sliding Door and Lift and Slide Roller Assemblies, was last updated in 2018. “The AAMA 906 task group made quick work of an important update to capture a market trend toward heavy sliding doors,” said Matt Taylor (HOPPE North America), co-chair of the FGIA Heavy Duty Roller Assembly Task Group.

“Previous requirements for operating force considered rollers with rated weight capacities to 100 pounds,” Taylor said. “Now, roller assemblies ranging from weight capacities of 75 pounds to more than 600 pounds will be tested to proportionate levels of operating force.”

Under the updated specification, representative samples of door rollers are evaluated for performance at the weight rating specified by the roller manufacturer by cycling the rollers under load for 10,000 cycles. Clearance and operating force measurements are taken before and after the cycle test to ensure performance remains within specified tolerances.

Related Stories

Codes and Standards | May 5, 2021

Majority of schools took steps to improve air quality during pandemic

Districts still have unmet needs, face high costs and outdated building infrastructure.

Codes and Standards | May 3, 2021

Fire stops critical to preserving three-decker housing

Old multi-family structures continue to provide badly needed homes in urban zones.

Codes and Standards | Apr 29, 2021

Dept. of Energy publishes energy savings analysis for ANSI/ASHRAE/IES Standard 90.1-2019

More than 4% savings for commercial buildings found for the updated code.

Codes and Standards | Apr 28, 2021

Building-integrated solar power turns buildings into power plants

Multiple alternatives could replace or complement rack-mounted PV arrays.

Codes and Standards | Apr 27, 2021

Ten real estate groups sign on to New York State’s high-rise decarbonization challenge

Each signee commits to carbon neutrality in one or more high-rise buildings it owns.

Codes and Standards | Apr 26, 2021

Dozens of companies, organizations call for Congress to double Energy Star funding

Despite broad support, program’s budget has steadily declined in recent years.

Codes and Standards | Apr 22, 2021

Alabama fire chiefs oppose proposal to change school building code oversight

Bill would move code compliance control from state to local boards.

Codes and Standards | Apr 21, 2021

After dry winter, California ramps up wildfire prevention efforts

State to spend half a billion dollars on projects including making buildings more fire resistant.

Codes and Standards | Apr 20, 2021

U.S. electric grid is halfway to zero carbon

Other sectors including buildings lag power industry.

boombox1
boombox2
native1

More In Category

Warehouses

California bill would limit where distribution centers can be built

A bill that passed the California legislature would limit where distribution centers can be located and impose other rules aimed at reducing air pollution and traffic. Assembly Bill 98 would tighten building standards for new warehouses and ban heavy diesel truck traffic next to sensitive sites including homes, schools, parks and nursing homes.




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021