flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Specification for field testing newly installed storefronts, curtain walls, sloped glazing systems updated

Codes and Standards

Specification for field testing newly installed storefronts, curtain walls, sloped glazing systems updated

The specification is used to verify air infiltration resistance performance and water penetration resistance.


By Peter Fabris, Contributing Editor | May 10, 2024
Image by wal_172619 from Pixabay
Image by wal_172619 from Pixabay

The Fenestration and Glazing Industry Alliance (FGIA) updated a specification establishing requirements for field testing newly installed storefronts, curtain walls, and sloped glazing systems.

AAMA 503-24, Voluntary Specification for Field Testing of Newly Installed Storefronts, Curtain Walls and Sloped Glazing Systems establishes the requirements for field test specimens, apparatus, sampling, test procedures and test reports to be used in verifying the air infiltration resistance performance and/or water penetration resistance performance of newly installed fenestration products.

The Testing Criteria of Commercial Fenestration Updates Task Group completed a full technical review of the specification for the new edition. A new section about significance and use was added. Sections addressing sampling, site preparation, and responsible parties were expanded. The section on test procedures was also revised, clarifying that air leakage resistance testing under AAMA 503 is optional. Definitions of water penetration were also updated.

“When used as part of a comprehensive building commissioning program, AAMA 503 provides reasonable assurance that the installed fenestration products will perform to the specified or rated air leakage and/or water penetration performance levels with allowances given for field performance,” says Jason Seals, FGIA certification services manager, fenestration.

Related Stories

Codes and Standards | Apr 1, 2021

Cuomo proposes strengthened NY building codes to boost efficiency

Would apply to appliance, equipment efficiency and reduce water use.

Codes and Standards | Mar 25, 2021

N.C.’s Outer Banks’ communities struggle for ways to keep the sea from overrunning them

Tax hikes for beach replenishment offer temporary solution.

Codes and Standards | Mar 23, 2021

The 15-minute city may not work in much of North America

Segregated neighborhoods and car-centric cities may not adapt to the European model.

Codes and Standards | Mar 22, 2021

Think tank offers plan for new approach to reduce neighborhood poverty

Strategy uses more targeted approach to invest in low-income areas.

Codes and Standards | Mar 19, 2021

California city bans construction of new gas stations

Existing stations will not be allowed to add more pumps.

Codes and Standards | Mar 18, 2021

Congressmen ask Biden to tackle rising lumber costs

Rising materials costs and supply shortages threaten economic recovery, housing starts.

Codes and Standards | Mar 16, 2021

Massachusetts bill would mandate rooftop solar on new homes, commercial buildings

Proposed Bay State mandate modeled on California’s.

Codes and Standards | Mar 15, 2021

Nevada may create areas for tech companies to form own governments

Legislation calls for ‘Innovation Zones’ that could become smart cities.

Codes and Standards | Mar 11, 2021

Los Angeles commits to carbon-free city buildings

City will take into account embedded carbon when contracting to buy construction products.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021