Research indicates that most American cities will experience up to five or 10 times as many excessively hot (90+ degrees Fahrenheit) days within a few decades.
To help reduce urban heat, 22 U.S. organizations have launched the Smart Surfaces Coalition. The group’s aim is to help cities to understand how to use advanced surface technologies to reduce heat and prevent flooding.
U.S. cities can cut excess heat days by half, save $700 billion, and create 270,000 new jobs by deploying smart surfaces, according to a news release from the U.S. Green Building Council. “Rapidly rising temperatures are already costing consumers and companies billions in higher energy and health care costs, and making American communities less livable and healthy,” the release says.
Smart surface technologies allow cities to better manage sun radiation and storm water runoff through:
— Cool roofs and pavements that reflect away (instead of absorbing) sunlight—cutting temperatures and smog
— Green roofs and trees that provide shade and reduce flood risk
— Solar PV that converts sunshine into electricity and provides shade
— Porous pavements, sidewalks, and roads that reduce water runoff and flooding and cut the cost of managing storm water
Related Stories
| Feb 6, 2013
Lumber Standard Committee approves new Southern Pine design value changes
The American Lumber Standard Committee Board of Review has approved the Southern Pine Inspection Bureau’s design value changes for all sizes and grades of visually graded Southern Pine dimension lumber.
| Feb 6, 2013
CEIR seeks public input on draft of PV racking and attachment document
The Center for Environmental Innovation in Roofing (CEIR) has released the first public draft of PV Racking and Attachment Criteria for Effective Low Slope Metal Panel Roof System Integrationfor an initial round of public comment.
| Feb 6, 2013
Insurance Institute demonstration shows advantages of following wind resistance standards
A demonstration by the Insurance Institute for Business and Home Safety shows how powerful winds affect concrete-and-steel buildings built with different techniques.
| Jan 31, 2013
Proposed ASHRAE legionellosis prevention standard open for third public comment
Changes to a proposed ASHRAE legionellosis prevention standard associated with building water systems are open for public comment.
| Jan 31, 2013
More severe wind storms should prompt nationwide reexamination of building codes, says insurance expert
The increased number and severity of storms with high winds nationally should prompt a reexamination of building codes in every community, says Mory Katz, vice president, Verisk Insurance Solutions Commercial Property, Jersey City, N.J.
| Jan 31, 2013
California Building Standards Commission adopts 2013 code update
The California Building Standards Commission adopted the new 2013 state standards code that includes new energy code provisions, accessibility standards, green building and water use modifications.
| Jan 25, 2013
D.C. authority wants to halt sewer tunnel projects while investigating green stormwater alternatives
The District of Columbia Water and Sewer Authority has proposed suspending a tunnel-building project.
| Jan 25, 2013
Energy modeling needed to overcome ‘plug load problem’ to meet high green standards
Plug loads illustrate how much end-users impact overall building energy use.
| Jan 25, 2013
ASHRAE publishes revised filtration standard, combines Standard 52.1 and 52.2
A newly revised filtration standard from ASHRAE combines two standards aimed at improving the technical accuracy of filter testing.
| Jan 25, 2013
AISC 206-13 standard for structural steel erectors available for review
AISC 206-13, a quality management system standard for structural steel erectors, is now available for public review.