flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Sika Sarnafil Roof Recycling Program recognized by Society of Plastics Engineers

Sika Sarnafil Roof Recycling Program recognized by Society of Plastics Engineers


By By BD+C Staff | November 9, 2011
University of Iowa, Hawkeye Arena Always looking for opportunities to recycle materials that would otherwise end up in the lan
This article first appeared in the December 2011 issue of BD+C.

Sika Sarnafil has won the Plastics Recycling Technologies and Applications Award from the Society of Plastics Engineers. Sika's PVC recycling program is designed to recover and recycle vinyl-roofing membrane back into new roofing membrane at the end of its useful life.

The award was presented at the society’s Global Plastics Environmental Conference (GPEC 2011) in Atlanta, and distinguishes the program that was recognized by the Massachusetts Executive Office of Energy and Environmental Affairs in 2009. Sika Sarnafil is the only single ply roofing manufacturer with a program to recycle old roofs back into roofing membrane at the end of its useful life and the only company to have its recycling claims verified by UL Environment. Since 2004, Sika Sarnafil has recycled 27.4 million pounds of post-industrial vinyl and 852,000 pounds of post-consumer, old roofs since 2005.

“Sika Sarnafil continues to address energy conservation issues with this ground breaking resource recovery program,” said Brian Whelan, Senior Vice President, Sika Sarnafil. “We divert more than 98% of our vinyl raw materials from the waste stream by recycling them into roofing and waterproofing membranes. And, we make it easy for customers to achieve their sustainability goals, with energy-efficient solutions that minimize waste and environmental impact.”

Sika Sarnafil’s major roof recycling projects include:

  • Canadian Tire in Toronto – This project demonstrated Canadian Tire’s green policy and implemented the three “R’s of Green” – reduce, reuse, recycle
  • General Motors – In a real-world demonstration of “closed loop” recycling, Sika Sarnafil completed the largest vinyl roof recycling project in North America at a General Motors Customer Care & Aftersales building in Lansing, Mich.
  • Target – Numerous stores, including a retail center in Silver Spring, Md., have worked with Sika Sarnafil. This roof recycling project contributed to the goal of helping Target to become a “zero waste” company
  • The Burlington Coat Factory – A 120,000 sf roof portion of the Briggsmore Shopping Center in Modesto, Calif. was replaced with a new Sika Sarnafil system while the old roof will live on and be recycled into other Sika Sarnafil products.
  • University of Iowa, Hawkeye Arena – Always looking for opportunities to recycle materials that would otherwise end up in the landfill, the university was very excited about recycling its old roofing membranes
  • The Marriott Long Wharf Hotel on Boston Harbor – Sika Sarnafil’s first major roofing recycling project in North America in 2005, this project kicked off Sika Sarnafil’s roof recycling program.

The program is streamlined and simple, making it easy for contractors and building owners to participate. Sika ships containers and pallets to contractors free of charge. The recycled materials are simply loaded and turned over to Sika for processing. Contractor labor costs related to recycling are minimal, if any, and are often offset by savings in municipal disposal fees. BD+C

Related Stories

Architects | Jun 27, 2018

Steven A. Lichtenberger joins Leo A Daly as President

He will lead the firm’s global planning, architecture, engineering, and interiors practice worldwide.

Accelerate Live! | Jun 24, 2018

Watch all 19 Accelerate Live! talks on demand

BD+C’s second annual Accelerate Live! AEC innovation conference (May 10, 2018, Chicago) featured talks on AI for construction scheduling, regenerative design, the micro-buildings movement, post-occupancy evaluation, predictive visual data analytics, digital fabrication, and more. Take in all 19 talks on demand.

Building Team | Jun 22, 2018

What owners should know before choosing the design-build project delivery method

Outside of drawing up a well-written contract, owners often overlook a key attribute that can significantly impact the success of a design-build project, writes Skanska’s Julie Hyson.

Architects | Jun 14, 2018

Chicago Architecture Center sets Aug. 31 as opening date

The Center is located at 111 E. Wacker Drive.

Multifamily Housing | Jun 13, 2018

Multifamily visionaries: KTGY’s extraordinary expectations

KTGY Architecture + Planning keeps pushing the boundaries of multifamily housing design in the U.S., Asia, and the Middle East.

| Jun 11, 2018

Accelerate Live! talk: Regenerative design — When sustainability is not enough

In this 15-minute talk at BD+C’s Accelerate Live! conference (May 10, 2018, Chicago), HMC’s Eric Carbonnier poses the question: What if buildings could actually rejuvenate ecosystems?

| Jun 11, 2018

Accelerate Live! talk: The smart jobsite — Predictive visual data analytics for proactive project controls

In this 15-minute talk at BD+C’s Accelerate Live! conference (May 10, 2018, Chicago), a trio of experts in predictive visual data analytics presents how design-build giant Clayco has leveraged this technology to achieve production efficiency on several construction sites.

| Jun 11, 2018

Accelerate Live! talk: Design innovation at Adrian Smith + Gordon Gill Architecture

In this 15-minute talk at BD+C’s Accelerate Live! conference (May 10, 2018, Chicago), AS+GG’s Anthony Viola takes us behind the magic curtain to illuminate the firm’s methods for nurturing design innovation.

| Jun 11, 2018

Accelerate Live! talk: ‘AEC can has Blockchains?’

In this 15-minute talk at BD+C’s Accelerate Live! conference (May 10, 2018, Chicago), HOK’s Greg Schleusner explores how the AEC industry could adapt the best ideas from other industries (banking, manufacturing, tech) to modernize inefficient design and construction processes.

| Jun 11, 2018

Accelerate Live! talk: How advanced digital fabrication techniques are driving design innovation

In this 15-minute talk at BD+C’s Accelerate Live! conference (May 10, 2018, Chicago), SOM’s Lucas Tryggestad and Kyle Vansice present the firm’s 3D-printed building project and explore how digital fabrication is pushing design innovation.

boombox1
boombox2
native1

More In Category

Great Solutions

41 Great Solutions for architects, engineers, and contractors

AI ChatBots, ambient computing, floating MRIs, low-carbon cement, sunshine on demand, next-generation top-down construction. These and 35 other innovations make up our 2024 Great Solutions Report, which highlights fresh ideas and innovations from leading architecture, engineering, and construction firms.




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021