According to several studies and news reports, more than one billion birds die each year in North America after colliding with window structures. It is a serious issue, but understanding of it has been gaining steam over the last several years thanks to greater awareness, education and new glazing products like the AviProtek® line from Walker Glass. Having a product line available that can allow developers and architects the peace of mind that they will not be harming birds has been a great advancement.
The Boulevard Club is an iconic, century old structure in Toronto which needed an expansion. The windows facing Lake Ontario, which offer a breath taking view, needed to be bird friendly in order to reduce the number of strikes. In this case the award winning AviProtek® E, bird friendly low-e coated acid-etched glass was the right choice.
Tough Task Handled Smoothly
With any new product there are learning curves. Plus add in the pressure of a legendary structure and you have a recipe for an adventure. Fortunately the glazier on the job, Vision Aluminum was more than ready. When it came to Vision’s responsibility on the project, they made sure to seek out the most optimal product choice for the mission.
“Originally the glass was to have a bird frit coating on the 1st surface of the sealed unit. Our company turned to Trulite Industries (our glass supplier) for the most feasible product. We came to a conclusion and recommended Walker’s AviProtek® E with acid-etched markers on the outside surface and PPG solar control low-e coating on surface 2 given that its properties are wear, scratch and stain resistant as opposed to the aftermarket coating. Collectively this benefited the club giving it a lower maintenance cost on the glass. We had no complications, the great thing about Walker’s acid etched glass is that there is no aftermarket film applied to any exposed surface that makes it easy to handle and install,” Tromboukis said.
In the end, the installation of the glass went without issue and The Boulevard Club now has a distinctive and stunning addition featuring glass that has many more functions than just allowing light in.
About the Products Used
Walker Textures® AviProtek® E combines the acid-etch visual markers on the number 1 surface with the PPG Industries Solarban® high performance low-e coatings on position 2, creating the ideal bird friendly glazing solution to preserve birds’ lives and energy at the same time! This innovation brings the best of both worlds together and will help architects and building owners achieve their environmental goals and earn LEED credits, while meeting solar performance targets.
Related Stories
| Jan 21, 2011
Music festival’s new home showcases scenic setting
Epstein Joslin Architects, Cambridge, Mass., designed the Shalin Liu Performance Center in Rockport, Mass., to showcase the Rockport Chamber Music Festival, as well at the site’s ocean views.
| Dec 17, 2010
Subway entrance designed to exude Hollywood charm
The Hollywood/Vine Metro portal and public plaza in Los Angeles provides an entrance to the Red Line subway and the W Hollywood Hotel. Local architect Rios Clementi Hale Studio designed the portal and plaza to flow with the landmark theaters and plazas that surround it.
| Nov 16, 2010
NFRC approves technical procedures for attachment product ratings
The NFRC Board of Directors has approved technical procedures for the development of U-factor, solar heat gain coefficient (SHGC), and visible transmittance (VT) ratings for co-planar interior and exterior attachment products. The new procedures, approved by unanimous voice vote last week at NFRC’s Fall Membership Meeting in San Francisco, will add co-planar attachments such as blinds and shades to the group’s existing portfolio of windows, doors, skylights, curtain walls, and window film.
| Nov 11, 2010
Saint-Gobain to make $80 million investment in SAGE Electrochromics
Saint-Gobain, one of the world’s largest glass and construction material manufacturers, is making a strategic equity investment in SAGE Electrochromics to make electronically tintable “dynamic glass” an affordable, mass-market product, ushering in a new era of energy-saving buildings.
| Nov 11, 2010
Saint-Gobain to make $80 million investment in SAGE Electrochromics
Saint-Gobain, one of the world’s largest glass and construction material manufacturers, is making a strategic equity investment in SAGE Electrochromics to make electronically tintable “dynamic glass” an affordable, mass-market product, ushering in a new era of energy-saving buildings.
| Nov 3, 2010
First of three green labs opens at Iowa State University
Designed by ZGF Architects, in association with OPN Architects, the Biorenewable Research Laboratory on the Ames campus of Iowa State University is the first of three projects completed as part of the school’s Biorenewables Complex. The 71,800-sf LEED Gold project is one of three wings that will make up the 210,000-sf complex.
| Nov 3, 2010
Public works complex gets eco-friendly addition
The renovation and expansion of the public works operations facility in Wilmette, Ill., including a 5,000-sf addition that houses administrative and engineering offices, locker rooms, and a lunch room/meeting room, is seeking LEED Gold certification.
| Nov 3, 2010
Sailing center sets course for energy efficiency, sustainability
The Milwaukee (Wis.) Community Sailing Center’s new facility on Lake Michigan counts a geothermal heating and cooling system among its sustainable features. The facility was designed for the nonprofit instructional sailing organization with energy efficiency and low operating costs in mind.
| Nov 3, 2010
Rotating atriums give Riyadh’s first Hilton an unusual twist
Goettsch Partners, in collaboration with Omrania & Associates (architect of record) and David Wrenn Interiors (interior designer), is serving as design architect for the five-star, 900-key Hilton Riyadh.
| Nov 3, 2010
Virginia biofuel research center moving along
The Sustainable Energy Technology Center has broken ground in October on the Danville, Va., campus of the Institute for Advanced Learning and Research. The 25,000-sf facility will be used to develop enhanced bio-based fuels, and will house research laboratories, support labs, graduate student research space, and faculty offices. Rainwater harvesting, a vegetated roof, low-VOC and recycled materials, photovoltaic panels, high-efficiency plumbing fixtures and water-saving systems, and LED light fixtures will be deployed. Dewberry served as lead architect, with Lord Aeck & Sargent serving as laboratory designer and sustainability consultant. Perigon Engineering consulted on high-bay process labs. New Atlantic Contracting is building the facility.