Santa Monica, California recently became the first city in the world to require net-zero energy construction for all new single-family homes.
The new rule also calls for new multifamily and commercial buildings to reduce their energy consumption to 10% below the rates set in the 2016 California Energy Code. Santa Monica Mayor Tony Vazquez said the new ordinance will be a key part of the city’s strategy to achieve carbon neutrality by 2050.
Santa Monica’s initiative establishes an aggressive timetable for the city to meet the goals of California’s Long Term Energy Efficiency Strategic Plan by the California Public Utilities Commission in 2008, and is the first ordinance passed by a California municipality to strive for zero net energy construction. Most other California communities have lagged in reaching for the state’s efficiency targets.
Related Stories
Codes and Standards | May 16, 2018
New resources offer tips on off-site construction
NIBS documents address using pre-cast concrete, and commercial and legal considerations of modular construction.
Codes and Standards | May 15, 2018
Blast testing of loaded mass timber structures yields positive results
Four tests covered a spectrum of blast loads.
Codes and Standards | May 14, 2018
Maryland makes general contractors liable for failure of subs to pay employees
GCs could have to pay for up to three times the wages owed.
Codes and Standards | May 10, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 9, 2018
OSHA and state safety agencies write more than 100 silica citations in 6 months
Actions tending to come with investigation of other site conditions.
Codes and Standards | May 8, 2018
Powerhouse coalition builds energy positive buildings
The goal: build buildings that provide more power than they cost to build, run, and demolish.
Codes and Standards | May 7, 2018
Plan advances in Los Angeles for Climate Emergency Mobilization Department
Would oversee efforts to reduce greenhouse gas emissions across the city.
Codes and Standards | May 3, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 2, 2018
Energy Department releases Updated EnergyPlus and OpenStudio building energy modeling tools
The tools can now accept input in epJSON format.
Codes and Standards | May 1, 2018
ASHRAE publishes new energy simulation-aided design standard
Requires building energy modeling during schematic design.