flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Santa Fe is second city in the world to achieve LEED v4.1 Gold

Codes and Standards

Santa Fe is second city in the world to achieve LEED v4.1 Gold

New Mexico community gained credits for resilience planning, including public health crises.


By Peter Fabris, Contributing Editor | June 17, 2020

Courtesy Pixabay

Santa Fe recently achieved the LEED Gold rating under the LEED v4.1 system—making it the second city in the world to achieve this distinction.

There are more than 100 LEED-certified cities and communities, but these were achieved under earlier versions of LEED. Santa Fe achieved credits for resilience planning activities that strengthen its ability to respond and adapt to climate change risks, natural and man-made hazards, and extreme events including public health crises. The importance of resilience has been magnified as communities respond to the COVID-19 pandemic.

The LEED for Cities certification was backed by a grant from Bank of America that was awarded by USGBC to 15 cities and communities. The grant provided financial assistance, educational resources, and technical support.

When the city applies for recertification in 2025, it hopes to achieve Platinum certification.

Related Stories

Codes and Standards | Mar 9, 2017

WiredScore forms Connectivity Advisory Committee

The committee's creation is an important step forward for the group that evaluates internet connectivity in buildings.

Codes and Standards | Mar 8, 2017

New guide examines multifamily high-performance ventilation

The focus is on cost and performance of various systems.

Codes and Standards | Mar 7, 2017

Canada’s national building codes will encompass effects of climate change

Forecasted data, not historical data, will be used as the basis for the codes.

Codes and Standards | Mar 6, 2017

ConsensusDocs updates standard short contract editions

The updates address industry changes impacting insurance, legal, technology, and terminology.

Codes and Standards | Mar 3, 2017

ASCE updates standard for structures using tensile membrane

The new sstandard combines guidelines for conventional tensile membrane structures with frame-covered membrane structures.

Codes and Standards | Mar 1, 2017

EPA's 2017 Construction General Permit now in effect

The regulation governs compliance with effluent limits.

Codes and Standards | Feb 28, 2017

Concern grows for high tide flood vulnerability in Mid-Atlantic states

Washington, D.C., and Annapolis, Md., could flood every three days by 2045.

Codes and Standards | Feb 27, 2017

Green building saves operating costs and boosts asset value

A new report shows 14% cost savings and a 7% increase in value when green standards are met.

Codes and Standards | Feb 24, 2017

Scant data hampering energy, water efficiency at sports venues

New NIBS report says baseline information needs further development.

Codes and Standards | Feb 22, 2017

Plans for WELL Building Standard include linkage with other green building standards

The planned updated version will be customizable for any building type.

boombox1
boombox2
native1

More In Category




Government Buildings

OSHA’s proposed heat standard published in Federal Register

The Occupational Safety and Health Administration (OSHA) has published a proposed standard addressing heat illness in outdoor and indoor settings in the Federal Register. The proposed rule would require employers to evaluate workplaces and implement controls to mitigate exposure to heat through engineering and administrative controls, training, effective communication, and other measures.

halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021