OSHA's National Safety Stand-Down during the week of May 2nd prompted a focus on construction safety in the business press and other media outlets, and by the industry as a whole.
One notable development came from Gilbane Building Co. which has encouraged OSHA to mandate the use of safety harnesses for any construction worker operating above 6 feet high. Gilbane has implemented this policy on its own, creating a stricter internal standard than what OSHA requires.
OSHA requires harnesses for steelworkers operating above 25 feet. Workers on scaffolds above 10 feet must connect to a harness, but are only required to use one attachment. Gilbane’s says its more stringent policy has prevented at least 20 potentially fatal falls over the past five years.
The Bureau of Labor Statistics says that private construction fatalities increased 9% to 899 in 2014, the highest number since 2008. The increase came with a sharp rise in construction activity.
Related Stories
Codes and Standards | Mar 7, 2017
Canada’s national building codes will encompass effects of climate change
Forecasted data, not historical data, will be used as the basis for the codes.
Codes and Standards | Mar 6, 2017
ConsensusDocs updates standard short contract editions
The updates address industry changes impacting insurance, legal, technology, and terminology.
Codes and Standards | Mar 3, 2017
ASCE updates standard for structures using tensile membrane
The new sstandard combines guidelines for conventional tensile membrane structures with frame-covered membrane structures.
Codes and Standards | Mar 1, 2017
EPA's 2017 Construction General Permit now in effect
The regulation governs compliance with effluent limits.
Codes and Standards | Feb 28, 2017
Concern grows for high tide flood vulnerability in Mid-Atlantic states
Washington, D.C., and Annapolis, Md., could flood every three days by 2045.
Codes and Standards | Feb 27, 2017
Green building saves operating costs and boosts asset value
A new report shows 14% cost savings and a 7% increase in value when green standards are met.
Codes and Standards | Feb 24, 2017
Scant data hampering energy, water efficiency at sports venues
New NIBS report says baseline information needs further development.
Codes and Standards | Feb 22, 2017
Plans for WELL Building Standard include linkage with other green building standards
The planned updated version will be customizable for any building type.
Codes and Standards | Feb 21, 2017
Aging building code inspectors and government belt-tightening could cause crisis
Inspectors are edging toward retirement with no understudies in place.
Codes and Standards | Feb 20, 2017
AISI publishes three new cold-formed steel framing research reports
Seismic simulation, roof trusses, steel-to-steel and sheathing-to-steel connections are examined in the reports.