flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Safety Stand-Down yields proposals to boost construction safety

Codes and Standards

Safety Stand-Down yields proposals to boost construction safety

One example: Gilbane encourages safety harnesses for all working above 6 feet.


By Peter Fabris, Contributing Editor | May 9, 2016
Safety Stand-Down yields proposals to boost construction safety

Photo: Matt Brown/Creative Commons.

OSHA's National Safety Stand-Down during the week of May 2nd prompted a focus on construction safety in the business press and other media outlets, and by the industry as a whole.

One notable development came from Gilbane Building Co. which has encouraged OSHA to mandate the use of safety harnesses for any construction worker operating above 6 feet high. Gilbane has implemented this policy on its own, creating a stricter internal standard than what OSHA requires. 

OSHA requires harnesses for steelworkers operating above 25 feet. Workers on scaffolds above 10 feet must connect to a harness, but are only required to use one attachment. Gilbane’s says its more stringent policy has prevented at least 20 potentially fatal falls over the past five years.

The Bureau of Labor Statistics says that private construction fatalities increased 9% to 899 in 2014, the highest number since 2008. The increase came with a sharp rise in construction activity.

Related Stories

Codes and Standards | May 8, 2018

Powerhouse coalition builds energy positive buildings

The goal: build buildings that provide more power than they cost to build, run, and demolish.

Codes and Standards | May 7, 2018

Plan advances in Los Angeles for Climate Emergency Mobilization Department

Would oversee efforts to reduce greenhouse gas emissions across the city.

Codes and Standards | May 3, 2018

Data collection, machine learning boost building efficiency

Sensors, software algorithms squeeze out waste.

Codes and Standards | May 1, 2018

ASHRAE publishes new energy simulation-aided design standard

Requires building energy modeling during schematic design.

Codes and Standards | Apr 30, 2018

CALGreen projects pre-approved for streamlined LEED v4 requirements

Reduces need to run additional energy models.

Codes and Standards | Apr 26, 2018

New standard supports community resilience

ASTM International guidance supports cost-effective ways to withstand and recover from disasters.

Codes and Standards | Apr 25, 2018

Lessons learned from decades of Superfund cleanups guide contaminated land reuse

Sites repurposed for residential, commercial use, and solar energy generation.

Codes and Standards | Apr 24, 2018

Vibrant downtown core the key for urban multifamily development

Nighttime activity makes the difference.

Codes and Standards | Apr 19, 2018

ILFI launches new Zero Carbon Certification

Offers greater flexibility around project fuel types and offsetting renewables.

boombox1
boombox2
native1

More In Category

Sustainability

Grimshaw launches free online tool to help accelerate decarbonization of buildings

Minoro, an online platform to help accelerate the decarbonization of buildings, was recently launched by architecture firm Grimshaw, in collaboration with more than 20 supporting organizations including World Business Council for Sustainable Development (WBCSD), RIBA, Architecture 2030, the World Green Building Council (WorldGBC) and several national Green Building Councils from across the globe.




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021