A coalition of trade groups is sponsoring continued analysis of a reroofing project at the Onondaga County Correctional Facility in Jamesville, New York. This research project on advanced roofing systems will evaluate the benefits of thermal insulation and cool roofing in Northern climates.
The Asphalt Roofing Manufacturers Association (ARMA), the EPDM Roofing Association (ERA) and the Polyisocyanurate Insulation Manufacturers Association (PIMA) have joined forces to assist the Onondaga County Department of Facilities Management study building energy use and storm water runoff from roof systems. Temperature and rain data from the project, which includes vegetative roofing, increased insulation levels and cool roofs, will provide information on building performance and roof covering selection.
The county worked with Ashley-McGraw Architects (and CDH Energy to design and install a field-monitoring system to collect data on thermal performance, weather conditions and roof runoff from four buildings at the Jamesville facility. CDH Energy released a report in October, 2011, that made recommendations on roof covering selection.
With the instrumentation still in place, the study can continue evaluating the roof coverings over a longer time to better see how they interact with weather conditions. Of particular interest is the effect of accumulated snow on roofs that may affect the buildings’ thermal performance. The project is expected to run through 2015.
Related Stories
| Nov 16, 2012
South Dakota prefers LEED over building code on state projects
“(LEED is) much better than a mandatory building code because you get a little wiggle room in these projects,” said Mike Mueller, a spokesman for the South Dakota Bureau of Administration.
| Nov 16, 2012
AAMA publishes quality assurance guidelines for Polyamide Thermal Barriers
The American Architectural Manufacturers Association (AAMA) has published QAG-2-12, Voluntary Quality Assurance Processing Guide for Polyamide Thermal Barriers.
| Nov 16, 2012
New ANSI/BIFMA standards developed for educational seating
The American National Standards Institute (ANSI) has approved the newly developed safety and performance standard for educational seating: ANSI/BIFMA X6.1-2012—the first of its kind.
| Nov 16, 2012
Green building councils in 62 countries expect 60% of their work to be green by 2015
More than half of the respondents to a survey of members of the Green Building Council in 62 countries expect green projects to comprise 60% of their work by 2015.
| Nov 16, 2012
Voters approve fewer construction ballot measures in 2012 than in 2008
Voters passed fewer ballot measures related to construction projects this year than they did in 2008, according to an analysis by the Associated General Contractors of America.
| Nov 9, 2012
New ANSI/BIFMA standard adds point for lower formaldehyde emissions
The ANSI/BIFMA e3-2012 Furniture Sustainability Standard now includes an additional point for furniture products that meet a new, lower formaldehyde emissions limit.
| Nov 9, 2012
Higher bar on LEED may not be harder to reach
The U.S. Green Building Council expects to substantially revise LEED next year, requiring builders beginning in 2015 to take new and more-detailed steps to get buildings certified.
