flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Roof collapse at Minnesota water park highlights failure to enforce codes

Codes and Standards

Roof collapse at Minnesota water park highlights failure to enforce codes

Rural areas say they can’t afford to enforce state-adopted building code.


By Peter Fabris, Contributing Editor | May 22, 2015
Roof collapse at Minnesota water park highlights failure to enforce codes

Some say that many governments in the Minneapolis metro area don't enforce building codes, which may have been the cause of a roof collapse at an indoor water park in the state. Image: Pixabay/jarmoluk

After the roof collapsed at the Thumper Pond Resort water park in Ottertail, Minn., last month, Minnesota media has highlighted the fact that many areas of the state do not enforce the state building code.

The roof collapse occurred around midnight on April 14 when the park was closed. There were no injuries. There were no high winds, snow, or other obvious causes indicating why the roof on the 10-year-old water park collapsed.

Many Minnesota governments outside the seven-county metro area that includes Minneapolis don't enforce the state building code, according to MPR News. That law requires inspections throughout a new construction process. But just 21 of the 87 Minnesota counties enforce it, according to the Minnesota Department of Labor and Industry.

Licensed contractors are required to build according to the state building code to construct a commercial or lodging facility in a remote area, but most of these projects proceed without a building official to provide oversight. Rural governments say they can’t afford to provide that service.

Related Stories

Codes and Standards | Sep 10, 2019

Retreat may be the best option for some coastal communities in face of sea level rise

A new study makes the case for relocating in a "strategic, managed" manner.

Codes and Standards | Sep 9, 2019

Free app calculates maximum allowable heights and areas for buildings

A free app that calculates the maximum allowable heights and areas for buildings of various occupancy classifications and types of construction has been released.

Codes and Standards | Sep 6, 2019

Standard for assessing frame deflection using one component polyurethane foams updated

The standard offers guidance when installing fenestration products.

Codes and Standards | Aug 29, 2019

The high cost of gridlock: $166 billion per year

Growing economy means more jobs, more cars, more hours stuck in traffic.

Codes and Standards | Aug 29, 2019

Industry leaders ask for government help as trades shortage worsens

AGC asks for more funding for education and increased immigration to fill gaps.

Codes and Standards | Aug 29, 2019

Code-conforming wood design guide available

The guide summarizes provisions for the use of wood and wood products in the 2018 IBC.

Codes and Standards | Aug 29, 2019

LEED residential market up 19% since 2017

The U.S. Green Building Council says that the LEED residential market has grown 19% since 2017. Nearly 500,000 single family, multifamily, and affordable housing units have been certified globally.

Codes and Standards | Aug 27, 2019

Slower speed limits in urban areas offer multiple benefits

Improved safety, better adoption of electric scooters and autonomous vehicles are possible if drivers ease off the accelerator.

Codes and Standards | Aug 27, 2019

Oregon rescinds tsunami-zone construction ban

Other states have no ban, but have strengthened building codes for tidal wave resilience.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021