flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Roof collapse at Minnesota water park highlights failure to enforce codes

Codes and Standards

Roof collapse at Minnesota water park highlights failure to enforce codes

Rural areas say they can’t afford to enforce state-adopted building code.


By Peter Fabris, Contributing Editor | May 22, 2015
Roof collapse at Minnesota water park highlights failure to enforce codes

Some say that many governments in the Minneapolis metro area don't enforce building codes, which may have been the cause of a roof collapse at an indoor water park in the state. Image: Pixabay/jarmoluk

After the roof collapsed at the Thumper Pond Resort water park in Ottertail, Minn., last month, Minnesota media has highlighted the fact that many areas of the state do not enforce the state building code.

The roof collapse occurred around midnight on April 14 when the park was closed. There were no injuries. There were no high winds, snow, or other obvious causes indicating why the roof on the 10-year-old water park collapsed.

Many Minnesota governments outside the seven-county metro area that includes Minneapolis don't enforce the state building code, according to MPR News. That law requires inspections throughout a new construction process. But just 21 of the 87 Minnesota counties enforce it, according to the Minnesota Department of Labor and Industry.

Licensed contractors are required to build according to the state building code to construct a commercial or lodging facility in a remote area, but most of these projects proceed without a building official to provide oversight. Rural governments say they can’t afford to provide that service.

Related Stories

| Feb 6, 2013

BOMA favors voluntary energy benchmarking and disclosure, opposes mandates

The Building Owners and Managers Association (BOMA) International announced support for voluntary energy benchmarking, but said it opposes mandates for benchmarking, disclosure, and labeling that many states and municipalities are implementing.

| Feb 6, 2013

Lumber Standard Committee approves new Southern Pine design value changes

The American Lumber Standard Committee Board of Review has approved the Southern Pine Inspection Bureau’s design value changes for all sizes and grades of visually graded Southern Pine dimension lumber.

| Feb 6, 2013

CEIR seeks public input on draft of PV racking and attachment document

The Center for Environmental Innovation in Roofing (CEIR) has released the first public draft of PV Racking and Attachment Criteria for Effective Low Slope Metal Panel Roof System Integrationfor an initial round of public comment.

| Feb 6, 2013

Insurance Institute demonstration shows advantages of following wind resistance standards

A demonstration by the Insurance Institute for Business and Home Safety shows how powerful winds affect concrete-and-steel buildings built with different techniques.

| Jan 31, 2013

Proposed ASHRAE legionellosis prevention standard open for third public comment

Changes to a proposed ASHRAE legionellosis prevention standard associated with building water systems are open for public comment.

| Jan 31, 2013

More severe wind storms should prompt nationwide reexamination of building codes, says insurance expert

The increased number and severity of storms with high winds nationally should prompt a reexamination of building codes in every community, says Mory Katz, vice president, Verisk Insurance Solutions Commercial Property, Jersey City, N.J.

| Jan 31, 2013

California Building Standards Commission adopts 2013 code update

The California Building Standards Commission adopted the new 2013 state standards code that includes new energy code provisions, accessibility standards, green building and water use modifications.

| Jan 25, 2013

D.C. authority wants to halt sewer tunnel projects while investigating green stormwater alternatives

The District of Columbia Water and Sewer Authority has proposed suspending a tunnel-building project.

| Jan 25, 2013

Energy modeling needed to overcome ‘plug load problem’ to meet high green standards

Plug loads illustrate how much end-users impact overall building energy use.

| Jan 25, 2013

ASHRAE publishes revised filtration standard, combines Standard 52.1 and 52.2

A newly revised filtration standard from ASHRAE combines two standards aimed at improving the technical accuracy of filter testing.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021