flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Roadmap for creating an effective sustainability program in healthcare environments

Healthcare Facilities

Roadmap for creating an effective sustainability program in healthcare environments

An effective sustainability program within a healthcare environment can produce several outcomes, such as workforce engagement, that are key drivers for higher reimbursements within the healthcare mission, writes CBRE's Dyann Hamilton.


By Dyann Hamilton, Alliance Director, CBRE | May 27, 2015
Roadmap for creating an effective sustainability program in healthcare environments

An interior view of a inpatient room in Fort Belvoir Community Hospital Oaks Pavilion. Photo: U.S. Navy via flickr

With a constant drive for operational efficiencies and reduction of costs under an outcome-based healthcare environment, there are increasing pressures to ensure that sustainability initiatives are not only cost effective and provide a return on investment, but socially and environmentally responsible. Oregon Health & Science University (OHSU) is in the business of wellness—the desired outcome.

An effective sustainability program within a healthcare environment is the hub of the wheel that can produce several outcomes, such as workforce engagement, that are key drivers for higher reimbursements within the healthcare mission. It’s also the prioritization of these potential outcomes that can drive the creation of the desired operating vision.

This is a challenging balance within an organization that has competing yet synergistic missions of healthcare, research, and academics. With an established operating vision as the foundation, the following provides a road map for achieving a highly effective sustainability program within OHSU’s healthcare mission.

 

BUILDING DESIGN & SYSTEMS

There are several benefits and results noted within the OHSU Fast Facts related to the design and systems that reflect the dedication to sustainability within a wellness environment. However, within this innovative approach are noted challenges that required strategic solutions to achieve the desired cost savings and operational functionality while balancing the desire to achieve high occupant and patient satisfaction.

MEP System Design. When designing the MEP systems for a sustainable building a common approach that can achieve the desired energy savings is to “right size” the mechanical and electrical systems. This involves system design with only the necessary capacity to serve the programs anticipated at the time of construction. By doing so, you reduce the added energy consumption while lowering your initial capital investment.

However, facility operators, who have significant experience with managing healthcare facilities, immediately understand the challenges that “right sizing” may cause. Healthcare facilities are in a perpetual state of change, constantly evolving to meet the needs and demands of the industry. Therefore, it is impossible to know during the project design phase, the long-term changes that will impact the capacity of these systems. By “right sizing” systems, future expansion and renovation possibilities may be limited.

In addition, in many areas of healthcare, there is a minimum of N+1 redundancy to meet the basic life support and other regulatory requirements. Special attention must be paid to the types of systems and the control sequencing to help ensure that maximum efficiencies can still be attained. As a result, additional operational cost impacts may be incurred due to a higher level of sophisticated programming, engineer skill-set and training required ensuring limited system disruption and/or operational impacts.

Balancing Innovative System Technology. The highly innovative system technology resulted in a design that included many firsts for a healthcare facility of its size and complexity. One of the key innovations was to install a membrane bioreactor wastewater treatment system that processes all of the sanitary waste on-site. The system transforms the wastewater into a non-potable water source and harvests rainwater and excess groundwater to reduce the dependence on municipal water supply by an astonishing 60%.

However, this innovative system is not without challenges. A membrane bioreactor is a living machine, and with the use of high level sterilants (used for disinfecting medical equipment) there is potential for significant disruptions to the waste system. To mitigate this risk, a comprehensive chemical waste disposal policy was created in collaboration with OHSU’s Environmental Health & Radiation Safety team to ensure occupants were adequately trained on the process of using and disposing of chemicals down drains.

In addition, on-going education was implemented to account for employee turnover and new chemical introduction. Signs were also posted above sinks and drainage areas that have a higher potential for chemical use to address complacent use.

Despite the noted water savings, the upfront cost of installing the system was significant, but was slightly offset by the deferral of system development fees. Also, an on-site wastewater treatment system requires ongoing operational costs, including daily lab testing, special environmental permits, and labor to oversee the treatment plant. Although, there was considerable thought for the financial investment, OHSU also focused on balancing their decision to reduce the impact on the environment and remain socially responsible in regard to the community’s wastewater system. This is a balance of planet, people, and profit—known as the three P’s of sustainability.

There were innovative design elements within the central utility plant (CUP), as well. The CUP utilizes a fuel source to generate power and then transfers the heat from this process into a heating source. Five natural-gas-fueled microturbines can transfer up to 300kw power resulting in the capability of generating up to 30% of the facility’s electricity. The heat generated by the turbines provides space heating, domestic water heating, as well as heating for three on-site swimming pools.

With power relatively cheap in the Pacific Northwest, the challenge is to ensure that efficiency of the turbines is maximized based on the demand for heat while balancing the need for electrical production as outlined within the microturbine carbon impact graphic below. If the costs creep slightly higher, the environmental impact reduction over using traditional methods of heat production and purchasing utilities will be a deciding factor when evaluating the three P’s.

 

SUSTAINABLE OPERATIONS

Environmental Services (EVS) - Cleaning. The EVS vendor, GCA Services, is a national janitorial company that provides cleaning services at the building. The GCA cleaning team has established a green cleaning program that reflects use of green cleaning practices and products.

To further enhance energy savings, GCA implemented a day cleaning schedule in 2011. This proved to be challenging in a healthcare environment so the hours were adjusted to create staggered afternoon start times based on the operating hours of each respective clinic. This allowed occupants to get to know their cleaner while limiting disruptions within exam rooms and other patient care areas. The benefits of day cleaning are as follows:
• Energy savings and environmental consciousness
• 
Improved occupant satisfaction via enhanced 1:1 occupant-cleaner relationships and confidence
• 
Office space is visibly and routinely well cleaned
• 
Employee responsibility and security
• 
Less turnover and enhanced productivity

As a LEED Platinum building, the operations team strives to promote green practices throughout the building. The selection of cleaning supplies is also a key component to establishing a green cleaning program especially with balancing the limitations of chemical usage with the on-site wastewater treatment system.

Healthcare requires a higher level of disinfection to prevent cross contamination of blood borne pathogens. Non-green disinfectants are used in patient care areas while green approved products are used in non-patient care areas. There is a balance in knowing when certain products are needed while also maintaining the green standard with the LEED certification requirements.

Waste Management. A fully comprehensive recycling program was implemented upon occupancy of the building through collaboration with the City of Portland’s Bureau of Planning & Sustainability. The program includes recycling for paper, plastic, tin, aluminum, glass, cardboard, light bulbs, batteries and composting.

But, how do you ensure that you are achieving an effective waste management program within a very busy patient care environment? Simple, create a competition and promote the benefits and results to enhance buy-in and a high level of engagement.

To promote better recycling habits, CHH does an annual waste audit to highlight the amount of recyclables that are being put in the trash. The audit is conducted on a regular business day with normal volume of occupants and visitors. The project team physically separates the entire waste stream during the audit period into its component parts, measures each waste type by weight and tracks the amount of recyclables that were properly diverted from the waste stream via the CHH recycling program.

Tenants are notified of their results and their overall performance compared to the previous year and the best performance is recognized and awarded. With promotion of the results and continuing tenant education, OHSU hopes to see improved results year after year as it creates a competitive environment among the tenants.

 

STRATEGIC COMMUNICATIONS

Occupant education is a main driver for ongoing buy-in and consistent satisfaction and should constantly evolve through various communication paths to achieve a broadly engaged audience. The web portal at www.southwaterfrontcampus.com serves as a centralized intranet that provides resources such as the tenant handbook, access to the Computerized Maintenance Management System (CMMS), and other general tools and announcements.

Building-wide, tenant meetings are held on a quarterly basis to provide general updates to department managers and service line contacts for the campus. This collaborative approach ensures there is a strong foundation for the program delivery as well as OHSU’s contribution to setting a high performance standard and results. A quarterly newsletter is distributed to tenants in the weeks following the tenant meeting, providing highlights on all information  resented. It is the combination of collaborative meetings coupled with follow-up visual information via several communication paths that has contributed to a high level of occupant engagement.

In addition, an annual sustainability report is provided to OHSU and building occupants providing a visual synopsis of how the platform and LEED framework contribute to the overall program results and return on investment to reinforce dedication to the sustainable strategies implemented under the operating vision.

Surveys are also deployed to occupants annually, as well as via the CMMS throughout the year to identify areas of success and improvement. The high level of engagement is apparent within a busy healthcare environment with a high level of survey participation over the past nine years with a department response rate above 64% versus an industry-standard that is typically around only 20%. In addition to occupant engagement, you must have the right tools to deploy an effective program. A detailed playbook that defines program roles and responsibilities amongst team members will ensure consistent implementation and outcomes. The playbook serves as an  invaluable training guide for new hire onboarding, as well as a blueprint for future growth.

Achieving sustainability in a healthcare environment can be challenging. A solutions oriented approach for developing systems, implementing technology and investing in team resources will aid in building the foundation necessary to deliver the desired results.

About the Author: Dyann Hamilton is an Alliance Director at CBRE with over 20 years of commercial real estate experience. She is responsible for on-site facilities and project management services, lease administration and accounting for over 1 million square feet of real estate in the South Water-front District for Oregon Health & Science University, Portland State University and Oregon State University. Her portfolio includes healthcare, research and academic use within LEED-Platinum Certified facilities.

Related Stories

| Dec 30, 2014

The future of healthcare facilities: new products, changing delivery models, and strategic relationships

Healthcare continues to shift toward Madison Avenue and Silicon Valley as it revamps business practices to focus on consumerism and efficiency, writes CBRE Healthcare's Patrick Duke.

| Dec 29, 2014

HDR and Hill International to turn three floors of a jail into a modern, secure healthcare center [BD+C's 2014 Great Solutions Report]

By bringing healthcare services in house, Dallas County Jail will greatly minimize the security risk and added cost of transferring ill or injured prisoners to a nearby hospital. The project was named a 2014 Great Solution by the editors of Building Design+Construction.

| Dec 29, 2014

New mobile unit takes the worry out of equipment sterilization during healthcare construction [BD+C's 2014 Great Solutions Report]

Infection control, a constant worry for hospital administrators and clinical staffs, is heightened when the hospital is undergoing a major construction project. Mobile Sterilization Solutions, a mobile sterile-processing department, is designed to simplify the task. The technology was named a 2014 Great Solution by the editors of Building Design+Construction.

| Dec 29, 2014

HealthSpot station merges personalized healthcare with videoconferencing [BD+C's 2014 Great Solutions Report]

The HealthSpot station is an 8x5-foot, ADA-compliant mobile kiosk that lets patients access a network of board-certified physicians through interactive videoconferencing and medical devices. It was named a 2014 Great Solution by the editors of Building Design+Construction.

BIM and Information Technology | Dec 28, 2014

The Big Data revolution: How data-driven design is transforming project planning

There are literally hundreds of applications for deep analytics in planning and design projects, not to mention the many benefits for construction teams, building owners, and facility managers. We profile some early successful applications.  

| Dec 28, 2014

AIA course: Enhancing interior comfort while improving overall building efficacy

Providing more comfortable conditions to building occupants has become a top priority in today’s interior designs. This course is worth 1.0 AIA LU/HSW.

| Dec 2, 2014

Nonresidential construction spending rebounds in October

This month's increase in nonresidential construction spending is far more consistent with the anecdotal information floating around the industry, says ABC's Chief Economist Anirban Basu.

| Dec 1, 2014

How public-private partnerships can help with public building projects

Minimizing lifecycle costs and transferring risk to the private sector are among the benefits to applying the P3 project delivery model on public building projects, according to experts from Skanska USA. 

| Nov 25, 2014

Emerging design and operation strategies for the ambulatory team in transition

As healthcare systems shift their care models to be more responsive to patient-centered care, ambulatory care teams need to be positioned to operate efficiently in their everyday work environments, write CannonDesign Health Practice leaders Tonia Burnette and Mike Pukszta.

| Nov 20, 2014

Lean Led Design: How Building Teams can cut costs, reduce waste in healthcare construction projects

Healthcare organizations are under extreme pressure to reduce costs, writes CBRE Healthcare's Lora Schwartz. Tools like Lean Led Design are helping them cope.

boombox1
boombox2
native1

More In Category

Curtain Wall

7 steps to investigating curtain wall leaks

It is common for significant curtain wall leakage to involve multiple variables. Therefore, a comprehensive multi-faceted investigation is required to determine the origin of leakage, according to building enclosure consultants Richard Aeck and John A. Rudisill with Rimkus. 


Healthcare Facilities

U.S. healthcare building sector trends and innovations for 2024-2025

As new medicines, treatment regimens, and clinical protocols radically alter the medical world, facilities and building environments in which they take form are similarly evolving rapidly. Innovations and trends related to products, materials, assemblies, and building systems for the U.S. healthcare building sector have opened new avenues for better care delivery. Discussions with leading healthcare architecture, engineering, and construction (AEC) firms and owners-operators offer insights into some of the most promising directions. This course is worth 1.0 AIA/HSW learning unit.



halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021