The Occupational Safety and Health Administration’s new rule regarding worker exposure to respirable crystalline silica (RCS) in construction takes effect Sept. 23.
The regulation sets out new protocols for minimizing worker exposure to silica. The rule is more comprehensive than the previous rule and will require contractors to make greater compliance efforts.
The National Roofing Contractors Association has developed tools for contractors to use to comply with provisions of the regulation. Resources include a PowerPoint presentation contractors can use to facilitate a training session regarding RCS as required by the rule.
Also available are links to outside resources that may be useful for compliance assistance with equipment options, objective data compilations, industrial hygiene and laboratory needs, and plan development, along with the regulatory text of the rule.
Related Stories
Codes and Standards | May 15, 2018
Blast testing of loaded mass timber structures yields positive results
Four tests covered a spectrum of blast loads.
Codes and Standards | May 14, 2018
Maryland makes general contractors liable for failure of subs to pay employees
GCs could have to pay for up to three times the wages owed.
Codes and Standards | May 10, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 9, 2018
OSHA and state safety agencies write more than 100 silica citations in 6 months
Actions tending to come with investigation of other site conditions.
Codes and Standards | May 8, 2018
Powerhouse coalition builds energy positive buildings
The goal: build buildings that provide more power than they cost to build, run, and demolish.
Codes and Standards | May 7, 2018
Plan advances in Los Angeles for Climate Emergency Mobilization Department
Would oversee efforts to reduce greenhouse gas emissions across the city.
Codes and Standards | May 3, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 2, 2018
Energy Department releases Updated EnergyPlus and OpenStudio building energy modeling tools
The tools can now accept input in epJSON format.
Codes and Standards | May 1, 2018
ASHRAE publishes new energy simulation-aided design standard
Requires building energy modeling during schematic design.
Codes and Standards | Apr 30, 2018
CALGreen projects pre-approved for streamlined LEED v4 requirements
Reduces need to run additional energy models.
