flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Resiliency measures for hurricanes can help with tornadoes

Resiliency measures for hurricanes can help with tornadoes

Damage on the edge of even strongest tornadoes can be reduced by adhering to hurricane resiliency standards


By BD+C Staff | May 28, 2014
Tornado damage in Tuscaloosa, Ala. Photo: Thilo Parg via Wikimedia Commons; Lice
Tornado damage in Tuscaloosa, Ala. Photo: Thilo Parg via Wikimedia Commons; License: CC BY-SA 3.0

Architect Butch Grimes, who examined the wreckage after a half-mile tornado struck Tuscaloosa, Ala., believes toughening building codes can reduce damage from twisters.

“The damage we had on the edges [of the tornado] could have been avoided with simple construction techniques,” Grimes told Scientific American.

The strongest hurricane winds on the coast can reach 180 mph, while the strongest tornadoes, category EF-5, have wind speeds of 200 to 250 mph. Tornadoes that strong are rare, with more common lower-category EF-2 or EF-3 tornadoes having wind speeds in the 100- to 150-mph range. The lower wind speeds, around hurricane strength, are most common on the edge of tornadoes.

“It’s probably not practical to design for EF-5 damage,” Grimes said. Weaker storms, however, can and should be designed for as coastal areas have been doing for years, he said.

Hurricane clips are one potential quick fix. In Alabama, the clips are required for buildings built within 5 miles of the Gulf of Mexico but remain optional farther inland. Reinforced windows could be another effective measure.

(http://www.scientificamerican.com/article/tornado-survival-could-improve-with-better-building-codes/)

Related Stories

Codes and Standards | Jan 10, 2022

New ratings services focus on climate risk for homeowners

Efficacy of models used in risk assessment varies.

Codes and Standards | Jan 6, 2022

Virginia contractors having a tough time finding diverse subs to meet state goals

Survey of primes may indicate similar issues at federal level.

Codes and Standards | Jan 5, 2022

Boston drops parking requirements for affordable housing

Measure expected to spur new projects.

Codes and Standards | Jan 4, 2022

Dept. of Energy Better Climate Challenge aims for 50% GHG emission reduction by 2030

Program offers technical assistance and peer-to-peer knowledge sharing.

Codes and Standards | Jan 4, 2022

Architects at New York firm take steps to unionize

Support for unionization reported at two other New York firms.

Codes and Standards | Jan 3, 2022

Biden’s executive order for a carbon-neutral government includes green materials mandate

As a driver of demand, federal procurement impact could ripple through the economy.

Codes and Standards | Jan 3, 2022

Controversial California solar power incentive proposal would reduce subsidies

Plan intended to encourage customers to install power storage systems.

Codes and Standards | Jan 3, 2022

New York City bans new gas hookups

Applies to gas stoves, boilers, and heaters in new buildings and buildings that undergo gut renovations.

Codes and Standards | Jan 3, 2022

New engineering guide on fire safety for very tall buildings released

Topics include emergency egress, fire resistance, building envelope, suppression, detection, alarms, and smoke control.

Codes and Standards | Dec 22, 2021

Updated ASCE 7-22 standard includes first-ever criteria for tornado-resistant design

New document provides up-to-date, coordinated loading provisions for general structural design.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021