flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Researchers use U. of Arkansas buildings as testbed for CLT panels

Codes and Standards

Researchers use U. of Arkansas buildings as testbed for CLT panels

Investigation could influence future use of the materials.


By Peter Fabris, Contributing Editor | September 13, 2019

Courtesy Pixabay

A new residence hall on the University of Arkansas campus will serve as a testbed for researchers to study Cross-Laminated Timber (CLT) panels.

Professors in the university’s Fay Jones School of Architecture and Design and the College of Engineering are collaborating to measure and analyze the moisture content of the panels used in the buildings. Adohi Hall is the nation’s first large-scale mass timber residence hall project, according to a university news release.

Construction on the residential areas of Adohi Hall was completed this summer. The hall consists of two five-story residential buildings connected by a third building that provides a common area. To monitor the effects of rain and humidity, sensors were placed in CLT panels in moisture-prone areas—bathrooms, kitchen and laundry areas, and near the exterior of the buildings.

The approximately 200,000 sf project with 708 beds was designed by Leers Weinzapfel Associates of Boston, Modus Studio of Fayetteville, Mackey Mitchell Architects of St. Louis and OLIN of Philadelphia. CLT panels were used in floors and ceilings. Columns and beams were made from glue-laminated pieces, which are bonded together with the wood grain of each layer running parallel rather than perpendicular, as CLT panels do.

Related Stories

Codes and Standards | Jun 17, 2016

Feds publish framework for evaluating public-private partnerships

No single factor determines whether a project yields stronger benefit as a P3.  

AEC Tech | Jun 17, 2016

Driverless cars could soon start impacting commercial, retail project design

Offsite parking and more space for valet parking lines are among the foreseeable changes.

Codes and Standards | Jun 17, 2016

Bay State moves toward single BIM protocol on state projects

Massport’s guidelines a step forward for integrated BIM initiative.  

Multifamily Housing | Jun 14, 2016

San Francisco voters approve tougher affordability requirement on new housing development

Critics charge that the measure may backfire and actually reduce new affordable units.  

Concrete | Jun 13, 2016

American Concrete Institute releases new Guide to Shotcrete

Includes information on application procedures, testing.  

Healthcare Facilities | Jun 10, 2016

Top 10 health technology hazards include some influenced by space design

ECRI Institute’s annual list includes operational and workflow issues.  

Codes and Standards | Jun 9, 2016

Supreme Court ruling could aid developers on properties containing wetlands

Unanimous decision allows landowners to take regulatory decisions straight to court.

Green | Jun 8, 2016

TD Bank Group's renovated Toronto office is first WELL-Certified project under WELL v1

The newly renovated 25,000-sf space achieved gold-level status.

Concrete | Jun 7, 2016

Concrete Institute publishes document providing concrete curing guidance

New curing monitoring techniques included.  

Energy | Jun 7, 2016

Energy modeling payback typically as short as one to two months

Energy modeling is a ‘no-brainer—like checking MPG on a car’

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021