The RELi 2.0 standard, which combines resilience and sustainability, is available for pilot project use.
Similar in structure to U.S. Green Building Council’s Leadership in Energy and Environmental Design (LEED) rating system, RELi is based on a system of points and prerequisites organized according to eight categories:
— Panoramic Approach (which covers pre-planning, discovery, and systems thinking)
— Hazard Preparedness
— Hazard Mitigation + Adaptation
— Community Cohesion/Social + Economic Vitality
— Productivity, Health + Diversity
— Energy, Water + On-site Food Production
— Materials + Artifacts
— Applied Creativity (which recognizes innovation)
RELi incorporates relevant strategies from other standards. About 20% of its agenda overlaps with LEED. While RELi is being piloted, it will be open to LEED-registered or -certified projects, with introductory pricing and support.
Two healthcare projects, CHRISTUS Spohn Shoreline Hospital, in Corpus Christi, Texas, and the University of Oklahoma Medical Center (OUMC), in Oklahoma City, are among the early trials.
Both facilities incorporate five-day emergency generator capacity, a minimum of four days’ food and water storage, redundancy in the central plant, an emergency plan, and facilities for community outreach and engagement.
Related Stories
| Feb 6, 2013
CEIR seeks public input on draft of PV racking and attachment document
The Center for Environmental Innovation in Roofing (CEIR) has released the first public draft of PV Racking and Attachment Criteria for Effective Low Slope Metal Panel Roof System Integrationfor an initial round of public comment.
| Feb 6, 2013
Insurance Institute demonstration shows advantages of following wind resistance standards
A demonstration by the Insurance Institute for Business and Home Safety shows how powerful winds affect concrete-and-steel buildings built with different techniques.
| Jan 31, 2013
Proposed ASHRAE legionellosis prevention standard open for third public comment
Changes to a proposed ASHRAE legionellosis prevention standard associated with building water systems are open for public comment.
| Jan 31, 2013
More severe wind storms should prompt nationwide reexamination of building codes, says insurance expert
The increased number and severity of storms with high winds nationally should prompt a reexamination of building codes in every community, says Mory Katz, vice president, Verisk Insurance Solutions Commercial Property, Jersey City, N.J.
| Jan 31, 2013
California Building Standards Commission adopts 2013 code update
The California Building Standards Commission adopted the new 2013 state standards code that includes new energy code provisions, accessibility standards, green building and water use modifications.
| Jan 25, 2013
D.C. authority wants to halt sewer tunnel projects while investigating green stormwater alternatives
The District of Columbia Water and Sewer Authority has proposed suspending a tunnel-building project.
| Jan 25, 2013
Energy modeling needed to overcome ‘plug load problem’ to meet high green standards
Plug loads illustrate how much end-users impact overall building energy use.
| Jan 25, 2013
ASHRAE publishes revised filtration standard, combines Standard 52.1 and 52.2
A newly revised filtration standard from ASHRAE combines two standards aimed at improving the technical accuracy of filter testing.
| Jan 25, 2013
AISC 206-13 standard for structural steel erectors available for review
AISC 206-13, a quality management system standard for structural steel erectors, is now available for public review.
| Jan 25, 2013
Builders Hardware Manufacturers Assn. revises five ANSI hardware standards
The Builders Hardware Manufacturers Association (BHMA) has released five revisions to ANSI/BHMA standards recently been approved by ANSI (American National Standards Institute).
