Early this year, Canada and several U.S. states enacted new regulations eliminating the use of blowing agents containing hydrofluorocarbons with high global warming potential.
The regulations apply to extruded polystyrene insulation and other closed-cell foam insulations that use HFC blowing agents. This material is used in low-slope roof systems to support thermal performance, provide moisture control, and deliver compressive strength.
The new HFC regulations are being implemented on a state-by-state basis and are currently effective in California, Colorado, New Jersey, New York, Vermont, and Washington. Delaware, Maryland, and Massachusetts have finalized similar regulations.
The regulations generally prevent the sale of non-complying products into a state and allow a grace period for sales of existing materials after which non-compliant products cannot be sold. The new regulations have hastened the pace of innovation for manufacturers to develop blowing agents with less global warming potential.
Related Stories
Codes and Standards | May 15, 2018
Blast testing of loaded mass timber structures yields positive results
Four tests covered a spectrum of blast loads.
Codes and Standards | May 14, 2018
Maryland makes general contractors liable for failure of subs to pay employees
GCs could have to pay for up to three times the wages owed.
Codes and Standards | May 10, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 9, 2018
OSHA and state safety agencies write more than 100 silica citations in 6 months
Actions tending to come with investigation of other site conditions.
Codes and Standards | May 8, 2018
Powerhouse coalition builds energy positive buildings
The goal: build buildings that provide more power than they cost to build, run, and demolish.
Codes and Standards | May 7, 2018
Plan advances in Los Angeles for Climate Emergency Mobilization Department
Would oversee efforts to reduce greenhouse gas emissions across the city.
Codes and Standards | May 3, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 2, 2018
Energy Department releases Updated EnergyPlus and OpenStudio building energy modeling tools
The tools can now accept input in epJSON format.
Codes and Standards | May 1, 2018
ASHRAE publishes new energy simulation-aided design standard
Requires building energy modeling during schematic design.
Codes and Standards | Apr 30, 2018
CALGreen projects pre-approved for streamlined LEED v4 requirements
Reduces need to run additional energy models.
