The Canada Green Building Council (CaGBC) has opened public registration for Canada’s first Zero Carbon Building (ZCB) Program.
The program provides third-party verification of compliance for zero carbon design and performance. The standard is designed to be broadly applicable across many types of new and existing buildings.
It was created to align with recent and upcoming federal and provincial policies that target net zero performance. CaGBC has been working with 16 Zero Carbon Pilot Projects across the country. This group represents the broad applicability of the standard, with both new and existing projects ranging in size from 20,000 sf to 1.3 million sf located in many parts the country.
Many of the pilot projects are completing the design stage and have found the ZCB Standard key to shaping their design strategies, CaGBC said in a press release. “Although we’ve been proponents and early adopters of high performance and sustainable building features, we recognize that incremental improvement is not moving the dial far enough and that we need a fundamental and transformative shift in how we design, specify, and build-out our projects,” said Kirk Robinson of Delta Land Development, one of the companies working on a pilot project.
Those interested in registering for the CaGBC ZCB Program or in learning more about the standard and its requirements can visit cagbc.org/zerocarbon.
Related Stories
| Jan 31, 2013
More severe wind storms should prompt nationwide reexamination of building codes, says insurance expert
The increased number and severity of storms with high winds nationally should prompt a reexamination of building codes in every community, says Mory Katz, vice president, Verisk Insurance Solutions Commercial Property, Jersey City, N.J.
| Jan 31, 2013
California Building Standards Commission adopts 2013 code update
The California Building Standards Commission adopted the new 2013 state standards code that includes new energy code provisions, accessibility standards, green building and water use modifications.
| Jan 25, 2013
D.C. authority wants to halt sewer tunnel projects while investigating green stormwater alternatives
The District of Columbia Water and Sewer Authority has proposed suspending a tunnel-building project.
| Jan 25, 2013
Energy modeling needed to overcome ‘plug load problem’ to meet high green standards
Plug loads illustrate how much end-users impact overall building energy use.
| Jan 25, 2013
ASHRAE publishes revised filtration standard, combines Standard 52.1 and 52.2
A newly revised filtration standard from ASHRAE combines two standards aimed at improving the technical accuracy of filter testing.
| Jan 25, 2013
AISC 206-13 standard for structural steel erectors available for review
AISC 206-13, a quality management system standard for structural steel erectors, is now available for public review.
| Jan 25, 2013
Builders Hardware Manufacturers Assn. revises five ANSI hardware standards
The Builders Hardware Manufacturers Association (BHMA) has released five revisions to ANSI/BHMA standards recently been approved by ANSI (American National Standards Institute).
| Jan 16, 2013
Pentagon plans huge spending cuts, including construction funds, amid budget deadlock fears
Defense Secretary Leon Panetta has ordered cuts to military spending as a precaution in case the White House and Congress fail to agree to avert $52 billion in cuts to the Pentagon budget this year.
| Jan 16, 2013
GSA's Green Proving Ground program pushes energy efficiency
The General Services Administration, which manages a portfolio of almost 10,000 buildings, is using the Green Proving Ground program to test technological advances in energy efficiency.
| Jan 16, 2013
Standards that include reflective roofs must take into account local climate
Roofs painted white can reflect heat and reduce warm-weather energy use, but in cooler regions like Minneapolis or Chicago, the issue of energy-efficiency is less straightforward.
