flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Reconstruction market benefits from improving economy, new technology [2014 Giants 300 Report]

Reconstruction market benefits from improving economy, new technology [2014 Giants 300 Report]

Following years of fairly lackluster demand for commercial property remodeling, reconstruction revenue is improving, according to the 2014 Giants 300 report.


By Julie S. Higginbotham | July 28, 2014
Office reconstruction to suit new work styles is becoming a hot category. A Buil
Office reconstruction to suit new work styles is becoming a hot category. A Building Team led by Suffolk Construction, The Archi

As commercial construction perks up in numerous sectors, reconstruction is also on the rise. According to a report released in January by industry research firm IBISWorld, years of fairly lackluster demand for commercial property remodeling are ending, and reconstruction revenue is improving (http://bit.ly/1lnYTpa). 

IBISWorld predicts about a 3% increase in commercial reconstruction revenues this year compared with 2013, followed by continued gains for the next five years. Among our BD+C Giants firms, reconstruction represents a growing percentage of revenues: a bit over 30% of the 2013 totals, compared with 27% for 2012.

IBISWorld credits much of the growth to improved corporate fortunes, leading to demand for workplace upgrades. Owner enthusiasm for sustainability-related remodeling is also driving continued improvement for the sector, according to the report. Renovations for education—where deferred improvements in infrastructure will eventually have to be addressed—and for healthcare and retail are likely growth areas.

IBISWorld’s analysis dovetails with the pattern of entrants to BD+C’s Reconstruction Awards program. Winners will be revealed next month, but office projects were unusually dominant this year, representing more than a third of submittals. A gamut of building types was involved, from adaptive reuses of warehouses for loft-like workplaces with Millennial appeal, to office-to-office reconstructions for private industry, nonprofits, and government agencies. Interestingly, a number of these projects involved midcentury behemoths instead of traditional grande dames.

 

GROWING APPRECIATION FOR MODERNIST STRUCTURES

TOP RECONSTRUCTION SECTOR ARCHITECTURE FIRMS

2013 Reconstruction Revenue ($)
1 Stantec $270,501,945
2 HDR 106,050,000
3 HOK 99,250,000
4 CannonDesign 93,000,000
5 Callison 80,992,574
6 Perkins+will 71,272,000
7 Leo A Daly 64,422,103
8 SmithGroupJJR 48,800,000
9 Hammel, Green and Abrahamson 47,634,302
10 NORR 47,086,734
SEE FULL LIST

 

TOP RECONSTRUCTION SECTOR ENGINEERING FIRMS

2013 Reconstruction Revenue ($)
1 Jacobs $1,842,130,000
2 URS Corp. 261,644,447
3 Wiss, Janney, Elstner Associates 68,083,200
4 CRB   68,000,000
5 Syska Hennessy Group 56,341,504
6 STV 55,451,000
7 Leidos 55,125,000
8 AKF Group 54,593,000
9 Dewberry 53,601,594
10 Thornton Tomasetti 53,009,856
SEE FULL LIST

 

TOP RECONSTRUCTION SECTOR CONSTRUCTION FIRMS

2013 Reconstruction Revenue ($)
1 Structure Tone $2,048,849,400
2 Turner Construction 2,024,000,000
3 Gilbane 1,861,820,000
4 Jacobs 1,605,895,000
5 DPR Construction 1,596,059,693
6 Whiting-Turner Contracting Co., The 1,221,682,434
7 PCL Construction 1,054,762,824
8 HITT Contracting 736,500,000
9 Consigli Construction 572,736,010
10 JE Dunn Construction 538,190,090
SEE FULL LIST

Buildings in the Beaux Arts, Romanesque, Georgian, and Art Deco styles have long been popular reconstruction candidates. Many such facilities are already landmarked—opening access to historic-preservation tax credits—and are affectionately viewed as essential to the local architectural and historical fabric. Facilities in these styles that are typical candidates for preservation through renovation or adaptive reuse include commercial and government offices, courthouses, hotels, apartments, academic buildings, train stations, and cultural buildings like libraries and theaters.


Giants 300 coverage of Data Centers is brought to you by Duro-Last http://duro-last.com.

The save-or-raze decision has sometimes been more difficult when the structure in question is of the Modernist/Brutalist variety—a scenario highlighted by the fate of Prentice Women’s Hospital in Chicago, a Bertrand Goldberg-designed structure that was iconic if not universally beloved. Demolition of the cloverleaf-shaped building commenced last fall after preservationists failed to persuade the city Landmarks Commission to protect it.

Elsewhere, however, stakeholders are choosing to leverage their midcentury assets through reconstruction. The U.S. General Services Administration has been a leader in using this strategy, and numerous examples popped up in the organization’s 2014 Design Awards. The redesigns are making the buildings more practical for current uses, and greener to boot.

Recent examples include the Edith Green-Wendell Wyatt Federal Building in Portland, Ore.; the Minton-Capehart Federal Building in Indianapolis; and the Dr. A.H. McCoy Federal Building in Jackson, Miss. The massive Thomas P. O’Neill Jr. Federal Building in Washington, D.C., won a BD+C Reconstruction Award last year for a radical rethinking that included both an exterior upgrade and a new atrium punched into the center.

Some private developers are on the bandwagon, too, and not just for office-to-office conversions. For instance, PCL Construction and Baker Barrios Architects recently led an adaptive reuse of the former headquarters of the Orlando Utilities Commission, which had been vacant for five years. Developer GDC Properties was able to have the Modernist building placed on the National Register of Historic Places, allowing use of historic tax credits for renovation. The result is the The Aloft Downtown Orlando Hotel. 

 

ADVANCED FAÇADES GAIN POPULARITY

The Green-Wyatt Federal Building exemplifies another trend: the growing contribution of advanced façade technologies to reconstruction projects. Increasingly, façades that have been prone to air and water leakage are being replaced with attractive, energy-efficient assemblies. 

In the case of Green-Wyatt, a modern glass curtain wall, accompanied by a rhythmic array of vertical-fin sunscreens, replaced a thick precast concrete facade. The redesign not only improved sustainability and freshened the appearance of the 18-story tower, but also increased rentable square footage because the new façade was much thinner than the one it replaced. The Building Team included CM/GC Howard S. Wright, a Balfour Beatty company; architects Cutler Anderson and SERA; and engineers Glumac, Interface Engineering, KPFF, and PAE Consulting Engineers.

Other patterns from our Reconstruction Awards submittals include the addition of PV and, sometimes, geothermal systems to existing facilities, as well as modern HVAC strategies like demand-controlled ventilation and variable refrigerant flow. Finding feasible, architecturally graceful ways to deploy new technologies in old buildings isn’t always easy; façade replacement and rooftop PV, in particular, can generate aesthetic debate. Nevertheless, with these technologies, reconstructions that would once have been deemed impractical can achieve a more favorable ROI and a lower carbon footprint. 

 

LASER SCANNING REDUCES UNPLEASANT SURPRISES

Many Giants firms mention the powerful contribution of BIM to reconstruction, as with new projects. Increasingly, AEC pros are also making use of laser scanning technology to lessen the odds of unpleasant discoveries during construction. Whether buying their own equipment or outsourcing the work, firms are finding that the technology can yield big benefits, especially in situations where as-builts are suspect or nonexistent.

“There are always a large amount of unknowns in renovation, including hidden architectural features, structural components, and existing mechanical systems,” says Kyle Absher, Virtual Construction Manager at Absher Construction Co., Puyallup, Wash. “In the past, such elements often had a negative impact because there was not sufficient time to properly coordinate around them in advance. Laser scanning technology gives us the ability to create a 3D as-built using multiple scans from different phases of demolition. This information can be imported directly into our coordination software and accounted for when designing new systems, saving our company considerable time and money.”

 

Read BD+C's full 2014 Giants 300 Report

Related Stories

| Aug 19, 2011

Thought Leader: Boyd R. Zoccola, chair and chief elected officer of BOMA International

Boyd R. Zoccola is Chair and Chief Elected Officer of BOMA International. A BOMA member since 1994, he has served on the Executive, Finance, Investment, and Medical/Healthcare Facilities Committees. An Indiana Real Estate Principal Broker and a board member of the Real Estate Round Table, he is Executive Vice President of Hokanson Companies, Inc., of Indianapolis, and has been involved in the development of $600 million worth of real estate. On a volunteer basis, Zoccola was president of Horizon House and a board member of Girls, Inc. He holds a BA in biology from Indiana University.

| Aug 19, 2011

How and why AEC professionals choose flooring systems

Design and construction professionals who completed our flooring survey had strong opinions about their preferred flooring type. 

| Aug 19, 2011

Underfloor air distribution, how to get the details right

Our experts provide solid advice on the correct way to design and construct underfloor air distribution systems, to yield significant energy savings.

| Aug 19, 2011

Enhanced acoustical design

Ambient noise levels in some facility types are trending up and becoming a barrier to clear communication between building occupants.

| Jul 22, 2011

The Right Platform for IPD

Workstations for successful integrated project delivery, a white paper by Dell and BD+C.

| Jul 22, 2011

High-performance windows and doors

Learning objectives After reading this article, you should be able to: Understand issues of thermal performance and energy efficiency in relation to window and door systems; describe optimal detailing of the window-wall interface and how it contributes to building performance, sustainability, and occupant well-being; understand how durability contributes to sustainable windows/doors; and list sustainable O&M requirements for window and door systems.

| Jul 21, 2011

Falling Architecture Billings Index reflects decrease in design demands

This months Architecture Billings Index (ABI), provided by the American Institute of Architects, is almost a full point lower than last month’s reported score. June’s reading of 47.2 was short of the required 50 to achieve billings increases, making July’s reading of 46.3 an unwelcome sign of market tidings.

boombox1
boombox2
native1

More In Category



Urban Planning

The magic of L.A.’s Melrose Mile

Great streets are generally not initially curated or willed into being. Rather, they emerge organically from unintentional synergies of commercial, business, cultural and economic drivers. L.A.’s Melrose Avenue is a prime example. 


Curtain Wall

7 steps to investigating curtain wall leaks

It is common for significant curtain wall leakage to involve multiple variables. Therefore, a comprehensive multi-faceted investigation is required to determine the origin of leakage, according to building enclosure consultants Richard Aeck and John A. Rudisill with Rimkus. 

halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021

Â