A proposed standard from ASHRAE and the National Electrical Manufacturers Association (NEMA) to create smart facilities supporting smart grids is open for public review from Aug. 7 until Oct. 6, 2015.
Part of an international effort, the project aims to provide a common basis for electrical energy consumers to describe, manage and communicate about electrical energy consumptions and forecasts. The proposed standard defines an object-oriented information model to enable appliances and control systems in homes, buildings, and industrial facilities to manage electrical loads and generation sources in response to communication with the smart electrical grid and to communicate information about those electrical loads to utility and other electrical service providers.
The standard is being considered for adoption as an international standard through the International Organization for Standardization. In addition, the standard coordinates with and uses content from the International Electrotechnical Commission’s Common Information Model (CIM) standards. It also coordinates with the North American Energy Standards Board’s basic energy usage data model standard, informally known as Green Button, that facilitates consumer access to energy usage information for homes and commercial and industrial buildings.
ASHRAE/NEMA Standard 201P, Facility Smart Grid Information Model can be read and commented upon here.
Related Stories
| Nov 26, 2012
How to boost resilient systems that are sustainable
Cities of the future can be both more resilient and more sustainable by promoting strategies that include solar power and green roofs, programs that minimize demand for energy, rain gardens, and permeable pavement.
| Nov 26, 2012
Developer of nation’s first LEED platinum skyscraper focuses on carbon reduction
The Durst Organization, the developer of the first LEED platinum certified skyscraper in the country, says it will not seek LEED certification for its residential pyramid planned for New York’s West 57th Street.
| Nov 26, 2012
Questions linger over ability of Miami's newer high-rises to withstand hurricanes
Some towers in Miami, rebuilt after a hurricane in 2005, were allowed to be constructed under older building codes instead of newer ones created after Hurricane Wilma.
| Nov 26, 2012
Changes in development and building standards needed for health of Potomac River
The Potomac River’s health stands to suffer if the region does not change its development and building standards, according to the Potomac Conservancy.
| Nov 16, 2012
South Dakota prefers LEED over building code on state projects
“(LEED is) much better than a mandatory building code because you get a little wiggle room in these projects,” said Mike Mueller, a spokesman for the South Dakota Bureau of Administration.
| Nov 16, 2012
AAMA publishes quality assurance guidelines for Polyamide Thermal Barriers
The American Architectural Manufacturers Association (AAMA) has published QAG-2-12, Voluntary Quality Assurance Processing Guide for Polyamide Thermal Barriers.
| Nov 16, 2012
New ANSI/BIFMA standards developed for educational seating
The American National Standards Institute (ANSI) has approved the newly developed safety and performance standard for educational seating: ANSI/BIFMA X6.1-2012—the first of its kind.
