flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Proposals to add more multifamily to Atlanta prompt drive for Buckhead to secede

Codes and Standards

Proposals to add more multifamily to Atlanta prompt drive for Buckhead to secede

City aims to increase housing as projections point to sharp population increase.


By Peter Fabris, Contributing Editor | December 8, 2021
Atlanta

Courtesy Pixabay

Proposals to boost housing in Atlanta are fueling a drive in the Buckhead section to secede from the city.

“Changes now being proposed by the City of Atlanta would subdivide residential lot sizes, increase housing density, decimate the tree canopy, tangle traffic, and strain resources,” reads the web site of the Buckhead City Committee, the organization aiming to form a new city. “Such devastation, proposed ostensibly to increase ‘affordable housing’ will only enrich developers at the cost of Buckhead’s livability.”

The zoning changes have been proposed while city planners look to a future that could mean a doubling of the city’s population to 1.2 million by 2050. City leaders would like to convert more single-family homes into multifamily dwellings. Today, about 60% of the city’s residential zones restrict such arrangements.

City leaders propose rezoning areas within a half-mile radius of public transit stations to encourage construction of moderate-sized apartment buildings nearby. One to four units per building would be the standard, but a developer could build up to eight units if one of them is below-market rate, and as many as 12 if two or more are below-market.

Related Stories

| Nov 16, 2012

South Dakota prefers LEED over building code on state projects

“(LEED is) much better than a mandatory building code because you get a little wiggle room in these projects,” said Mike Mueller, a spokesman for the South Dakota Bureau of Administration.

| Nov 16, 2012

AAMA publishes quality assurance guidelines for Polyamide Thermal Barriers

The American Architectural Manufacturers Association (AAMA) has published QAG-2-12, Voluntary Quality Assurance Processing Guide for Polyamide Thermal Barriers.

| Nov 16, 2012

New ANSI/BIFMA standards developed for educational seating

The American National Standards Institute (ANSI) has approved the newly developed safety and performance standard for educational seating: ANSI/BIFMA X6.1-2012—the first of its kind.

| Nov 16, 2012

Green building councils in 62 countries expect 60% of their work to be green by 2015

More than half of the respondents to a survey of members of the Green Building Council in 62 countries expect green projects to comprise 60% of their work by 2015.

| Nov 16, 2012

Voters approve fewer construction ballot measures in 2012 than in 2008

Voters passed fewer ballot measures related to construction projects this year than they did in 2008, according to an analysis by the Associated General Contractors of America.

| Nov 9, 2012

New ANSI/BIFMA standard adds point for lower formaldehyde emissions

The ANSI/BIFMA e3-2012 Furniture Sustainability Standard now includes an additional point for furniture products that meet a new, lower formaldehyde emissions limit.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021