flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Proposals to add more multifamily to Atlanta prompt drive for Buckhead to secede

Codes and Standards

Proposals to add more multifamily to Atlanta prompt drive for Buckhead to secede

City aims to increase housing as projections point to sharp population increase.


By Peter Fabris, Contributing Editor | December 8, 2021
Atlanta

Courtesy Pixabay

Proposals to boost housing in Atlanta are fueling a drive in the Buckhead section to secede from the city.

“Changes now being proposed by the City of Atlanta would subdivide residential lot sizes, increase housing density, decimate the tree canopy, tangle traffic, and strain resources,” reads the web site of the Buckhead City Committee, the organization aiming to form a new city. “Such devastation, proposed ostensibly to increase ‘affordable housing’ will only enrich developers at the cost of Buckhead’s livability.”

The zoning changes have been proposed while city planners look to a future that could mean a doubling of the city’s population to 1.2 million by 2050. City leaders would like to convert more single-family homes into multifamily dwellings. Today, about 60% of the city’s residential zones restrict such arrangements.

City leaders propose rezoning areas within a half-mile radius of public transit stations to encourage construction of moderate-sized apartment buildings nearby. One to four units per building would be the standard, but a developer could build up to eight units if one of them is below-market rate, and as many as 12 if two or more are below-market.

Related Stories

| May 28, 2013

Proposal to water down Las Vegas green building code draws criticism

A proposed bill before the Las Vegas City Council would allow any building built before 2009 undergoing a renovation to only have to meet the energy code requirements at the time of initial construction, not the current, stricter guidelines.

| May 28, 2013

Mazria: ‘No need for new power plants to meet growth in buildings sector’

A new analysis of federal data shows that the U.S. buildings sector has made enormous strides in efficiency over the last six years—potentially eliminating the need to build any new power plants to support growth in the sector through 2030.

| May 27, 2013

Support increasing in Ontario to change codes to allow taller wood frame construction

Developers and home builders are asking the Ontario government to change the building code to allow construction of six-story wood frame buildings.

| May 27, 2013

'JUST' label aims to assess social justice on building material manufacturers

At the Living Future's annual conference in May, Jason McLennan, and architecture firm BNIM founder Bob Berkebile launched the JUST label, an extension of the Declare label that addresses social justice and equity issues.

| May 27, 2013

Bipartisan legislation filed to revamp EPA lead rule

Bipartisan legislation has been introduced in the U.S. House of Representatives to reform the Environmental Protection Agency's (EPA) Lead: Renovation, Repair and Painting (LRRP) Rule.

| May 27, 2013

Bill would mandate contractors use subs identified in bids on federal projects

Rep. Carolyn Maloney (D-N.Y.) filed a bill in May that would require prime contractors that bid on federal construction projects over $1 million to list each subcontractor they plan to use for $100,000 or more of work.

| May 27, 2013

Maryland law on codes for wind resistance will take effect in October

The Insurance Institute for Business & Home Safety says that Maryland citizens will be safer due to legislation passed by the legislature and signed into law by Gov. Martin O’Malley.

| May 23, 2013

AGC Contractors Environmental Conference focuses on compliance issues

The 2013 AGC Contractors Environmental Conference June 13 and 14 in Arlington, Va., will include cost-effective strategies for firms to remain compliant and competitive.

| May 23, 2013

ASTM releases new carbon steel hollow structural sections

ASTM has released a new HSS standard, A1085 - 13 Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS).

| May 23, 2013

Group Health Puyallup medical center first project to achieve 'LEED for Health Care' certification

The Group Health Puyallup (Wash.) Medical Center is the first facility to be certified under the LEED for Healthcare (LEED-HC) rating system, earning LEED Gold.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021