From an integrated, single-component façade system to insulated roof panels, these 12 roofing and wall products and accessories all share one thing in common: metal.
1. Isoleren RL roof panel
Atas International
Insulated metal roof panel offers the appearance of standing seam metal roofing with the added benefits of thermal performance and durability. Its standing seam “T” lock design requires no lifting to engage. Available thicknesses: 2.5, three, four, five, and six inches. Nominal R-8 per inch of insulation thickness. Exterior and interior gauge: 26, 24, and 22. The panel’s core is continuously poured-in-place polyiso insulating foam.
2. Formawall
Centria
Insulated metal panel system has been enhanced with the Formawall Insulated Metal Vertical (IMV) Joint (pictured) and Formawall Pressure-Equalized (PE) Seal Plate. The IMV joint provides a thermal barrier at the end joint and eliminates exposed gaskets and sealants to reduce the opportunity for streaking or staining on the panels. The PE Seal Plate provides multiple lines of defense against air and water infiltration.
3. Highline wall panels
Petersen Aluminum
Metal wall panels feature varying rib patterns and widths for creative architectural effects. Highline panels are 13/8-inch deep, creating dramatic shadow lines. The panels can be installed horizontally or vertically for design flexibility. Options include 12- or 16-inch widths; no-clip or clip-fastened installation; and lengths up to 22 feet for aluminum and 30 feet for steel. Available in 45 colors.
4. Trespa Meteon
Trespa
New finish options are available for the Trespa Meteon line of architectural panels. The Lumen collection includes three finishes—Diffuse, Specular, and Oblique—that enable light to be reflected, scattered, enhanced, or muted. Diffuse removes glossiness, reflection, and texture for a smooth, subdued appearance. Oblique provides a matt-and-gloss surface that brings a natural, weathered look. Specular offers a reflective surface for liveliness with deep colors and gloss.
5. Benchmark Kreate panels
Kingspan
Metal façade system combines seamless steel or aluminum cassette façade technology with insulated panel designs to create an integrated, single-component system with design flexibility. The cassettes are integrated into each insulated panel and offer the ability to specify the color, size, and configuration of each cassette, including rounded corners. Benchmark Kreate offers faster installation versus traditional built-up rainscreens.
6. Durastar Ultra-Cool
PPG
New coil coatings combine an advanced silicone-modified polyester formulation with infrared-reflective pigments to extend the service life of metal roofing, siding, and panels. Polyester-based resin, cross-linking, and tinting technologies protect metal industrial, agricultural, and storage buildings while providing chalk resistance and fade resistance. IR-reflective pigments deflect solar heat, enabling buildings to stay cooler.
7. 138T Recover System
McElroy Metal
Standing seam metal roof system is designed to install directly over existing asphalt shingles, providing a fast, economical, and energy-efficient reroof solution. The cost of tear-off and dumping are eliminated, and the new system can be installed without the cost of an underlayment. Patent-pending clips create an energy-saving above sheathing ventilation (ASV) airspace between the existing roof and new 138T roof.
8. FRP CleanSeam
Metl-Span
Insulated panel system for food processing rooms creates virtually seamless walls and ceilings by combining fiberglass reinforced plastic (FRP) panel faces with a flush-surface hard joint. The joint has no voids and is mold, mildew, and impact resistant. Joints are permanently sealed with a two-part caulking compound. FRP CleanSeam eliminates the constant maintenance associated with silicone- and butyl-caulked joints that deteriorate from rigorous wash-down regimens.
9. Retro-R panel
MBCI
Designed for installation over existing metal roof systems, Retro-R is an exposed-fastening panel with rib spacing 12 inches on center, a rib height of 11/16 inch, and a minimum slope of 1/2:12. It has been approved as a minimum 26-gauge panel installed over an existing minimum 29-gauge PBR panel. Its integrated drip stop membrane prevents rust from the old roof from transferring to the new panel. Recently received statewide approval for use in Florida.
10. Fluropon Pure
Metal Sales and Valspar
Metal Sales’ line of metal wall and roof products is available with Valspar’s Fluropon Pure, a PVDF paint system formulated for compliance with the Living Building Challenge’s stringent requirements for hazardous material reduction. The coating is ideal for buildings with extreme environmental requirements, or anywhere a greener product is needed. Metal Sales also fully disclosed all of the ingredients in its acrylic-coated Galvalume roof and wall panels as Red List-free.
11. Tapered Series
Dri-Design
Lightweight aluminum panels can be angled in any direction to varying degrees and depths, offering design freedom without the need to modify the substrate or weather barrier. Tapered Series panels are particularly well suited for retrofit applications, where uneven and leaning walls are commonplace. Panel depth can range from 1¼ to four inches, depending on the severity of the taper design. Company offers panels in virtually any size.
12. RidgeLine panelS
Green Span Profiles
This patented insulated roof panel is a 23/8-inch-tall, mechanically seamed unit that covers 42 inches, with thickness options of 2.5, three, four, and five inches. RidgeLine panels slide together (no rolling or lifting to engage the sidelap), creating a continuous, weathertight seal at the sidelap with no interruptions at the clips. Exterior and interior metal panels are available in 26-, 24- and 22-gauge Galvalume/G90 galvanized and stainless steel.
Related Stories
| Aug 11, 2010
Only four out of 337 cities added construction jobs in 2009
Construction employment grew in only four out of 337 metropolitan areas in 2009 as spending on construction projects dropped by $100 billion in December to a six-year low of $903 billion, according to a new analysis by the Associated General Contractors of America of federal figures released recently.
| Aug 11, 2010
Zero Energy Buildings + Homes' Call for Editorial Contributions & Contributors
BD+C will publish its 8th Annual White Paper on Green Buildings, "Zero Energy Buildings + Homes," in November-and you can contribute to it. We're looking for highly qualified experts (or teams of experts) to write individual chapters (about 2,000-3,000 words). We've started the outline here, but we'd like your suggestions about additional chapters. What did we miss? Help us shape this important report.
| Aug 11, 2010
Blue ribbon panel unveils recommendations for NYC's green building codes
In response to City's request, the task force unveils more than 100 recommendations for greening NYC buildings, in most sophisticated analysis ever conducted by a municipality
| Aug 11, 2010
ULI: 'Old Normal' will not be a part of the housing recovery
As the U.S. economy recovers, emerging trends in demographics and consumer behavior will become major drivers of new housing opportunities, resulting in a residential market vastly different from the one that existed prior to the recession, according to Housing in America: The Next Decade, a new research paper authored by John K. McIlwain, senior resident fellow, Urban Land Institute/J. Ronald Terwilliger Chair for Housing.
| Aug 11, 2010
Billings increase less than a point in December, still in negative territory
The American Institute of Architects reported the December Architecture Billings Index rating was 43.4, up slightly from 42.8 in November. The score indicates a continued decline in demand for design services (any score above 50 indicates an increase in billings). AIA Chief Economist Kermit Baker said the inability to get financing is still the main roadblock to recovery.
| Aug 11, 2010
FMI: 2009 was the bottom for residential, non-residential construction still in freefall
While 2009 was likely the bottom in terms of percentage decline, 2010 will be the bottom in terms of dollar volume for non-residential construction, according to market analysts at consulting firm FMI. Residential construction is expected to begin recovering in 2010. The economy may show some signs of improving, but it is just the beginning of the downfall for nonresidential construction.
| Aug 11, 2010
SFI releases new sustainable forestry standard
The Sustainable Forestry Initiative has released a new standard. SFI 2010-2014 addresses climate change and bioenergy; strengthen unique SFI fiber sourcing requirements, which broaden the practice of sustainable forestry; complements SFI activities aimed at avoiding controversial or illegal offshore fiber sources, and embraces Lacey Act amendments to prevent illegal logging; and expands requirements for logger training and support for trained loggers and certified logger programs.
| Aug 11, 2010
Another steep decline in nonresidential construction activity projected for 2010
Despite signs that the overall U.S. economy is beginning to improve, nonresidential construction spending is expected to decrease by 13.4% in 2010 with a marginal increase of 1.8% in 2011 in inflation adjusted terms, according the American Institute of Architects' Consensus Construction Forecast. Commercial and industrial projects will continue to see the most significant decrease in activity. Thanks, in part, to federal stimulus spending, institutional building categories will fare better over the new year. BD+C, January 6
| Aug 11, 2010
WattStopper contributes freezer case occupancy sensor to DOE study
WattStopper has participated in a ground-breaking demonstration of solid-state lighting (SSL) technology combined with occupancy sensors in grocery store freezer cases. The project was supported under the U.S. Department of Energy (DOE) Solid-State Lighting GATEWAY Technology Demonstration Program. WattStopper contributed FS-705 Wide Angle PIR occupancy sensors to the project.
| Aug 11, 2010
Construction spending hits six-year low as employment declines in 324 of 337 cities
Construction employment declined in 324 out of 337 metropolitan areas over the past year as spending on construction projects dropped by over $137 billion in November to a 6-year low of $900 billion, according to a new analysis by the Associated General Contractors of America of federal figures released recently.
