Incorporating natural daylight into new buildings is of ever-increasing importance. These 12 glazing and daylighting products offer innovative ways to get the most out of a project's windows and glass components.
1. SunGuard CrystalBlue
Guardian Glass
Available coated and uncoated at 6mm thickness in a variety of sizes, this light-blue float glass gives specifiers multiple options in achieving performance and aesthetic requirements. SunGuard CrystalBlue features a visible light transmittance of 58%, a U-value of 1.03, and a solar heat gain coefficient of 0.69. Its subtle-blue hue complements the sky, sea, and surroundings.
2. StormWall XL
CRL-U.S. Aluminum
Hurricane-resistant curtain wall is engineered for design pressures up to +100/-100 psf and 15-psi static water resistance, providing protection against severe weather. It measures 21/2 x 71/2 inches and is glazed with 15/16-inch insulating laminated glass. Its continuous thermal spacer is interlocked within the horizontal and vertical pressure bars for improved thermal performance.
3. SunWave Daylighting System
Firestone Building Products
This double-glazed, acrylic, prismatic-layered dome uses 4,000 prisms per sf to refract, direct, and diffuse sunlight into thousands of micro sunbeams. The system catches up to 20% more light at low angles than standard shapes and transmits light to the workplace area without producing glare or hot spots. Features an insulated, condensation-resistant, thermally broken frame.
4. EcoVeil Sheer Collection
MechoSystems
This line of 100%-polyester, PVC-free shadecloth/window treatment is the first shadecloth/window treatment to meet the stringent Healthier Hospital Initiative Safer Chemicals Challenge. It’s also the first commercially available shadecloth that is able to pass NFPA 701 without requiring chemical flame retardants, says the maker. Available in 1% and 3% openness and stocked at 118 inches wide.
5. Fireframes ClearView
Technical Glass Products
This butt-glazed, fire-rated framing system eliminates the need for colored internal spacers or vertical mullions between adjoining pieces of glass. With a narrow 5mm vertical butt joint and nearly 10-foot heights, the system allows designers to create extensive fire-rated glazed walls with nearly colorless transitions between glass panels for greater vision and transparency within interior spaces.
6. 8300 Series
Wausau Window and Wall
Custom window series is available in a variety of styles—fixed, project-in or project-out casements, awnings, and hopper vents—and has been tested to meet AAMA AW-100 standards, including the new AAMA 910-16 lifecycle testing to 4,000 operating cycles. The company also tested floating vent (pictured) and fixed floating vent configurations, achieving an AAMA AW-40 Performance Class rating.
7. SOLARBAN 90 TINTED GLASS
Vitro Architectural Glass
Solar-control, low-e glass is available with an array of tinted glasses, including blue, bronze, gray, and green tints. Solarban 90 is a quad-silver-coated glass that incorporates a fourth “nano-layer” that can be manipulated to control its reflectivity, color, and solar performance. In a standard one-inch IGU, the coating has a solar heat gain coefficient of 0.23 and a visible light transmittance of 51%.
8. Electrochromic Glass
SageGlass
Looking to solve heat gain and glare issues at the offices of its law firm client Advent, architect Purdy & Slack Associates specified electrochromic glass for the curtain wall at the firm’s 47,000-sf building in Omaha, Neb. In addition to improved employee comfort and views, the glazing will allow Advent to lease part of the building. SageGlass is available in a range of shapes, colors, and sizes up to 5x10 feet.
9. GPX Hurricane
SAFTI FIRST
The GPX Hurricane Wall and Door system is now listed with the Texas Department of Insurance (TDI). The fire-rated glass and framing system satisfies TDI’s criteria for protection from windborne debris in Inland I and Seaward Zones, with wind speeds up to 120 mph and 130 mph, respectively. The system also has complete Florida Product Approval and UL Certifications for Wind-Resistant Building Components.
10. YES 60
YKK AP
Designed to accommodate taller, wider storefront openings, allowing more natural light, the YES 60 line of storefronts can be specified in heights as tall as 14 feet. The three models—FI, TU, and XT—feature YKK AP’s sill flashing design, with no blind seals, a tall back leg for enhanced water resistance, and a patent-pending three-point attachment of the end dam. Options include side lite curtain wall covers and pre-engineered corners.
11. Daylight Dimmer
Solatube INTL.
Designed for high-bay commercial applications such as event spaces and sports arenas, the SkyVault Series line of tubular daylighting devices is available with a Daylight Dimmer. The units feature a 29-inch diameter to maximize daylight, and a butterfly baffle that reduces “flares” when opening/closing, provides even light distribution, and allows users to dim the system to near blackout, for presentations, movies, plays, etc.
12. VNE-53 LOW-E COATING
Viracon
Designed to meet the nation’s most rigorous energy codes, VNE-53 triple-silver, low-e coating features a visible light transmittance of 52% and a solar heat gain coefficient of 0.23 (on low-iron glass in a standard insulating unit). Its neutral-silver exterior appearance provides a consistent color both straight on and off-angle. Available for oversized architectural glass in sizes up to 130x236 inches.
Related Stories
| Feb 10, 2011
Moen M•Power electronic faucets
At 0.5 gpm, Moen’s M•Power electronic faucets meet the current standards, and offer features that eliminate waste. Improved electronic sensors reduce reflectivity to stop false sensing, and turn off automatically after 30 seconds. Electronics can be installed above or below deck to accommodate different sink styles.
| Feb 3, 2011
Duro-Last Roofing, Inc. Adds Standing Seam Metal Product Line
Duro-Last Roofing, Inc. is adding a standing seam metal product line to its roofing system offerings. With five profiles and more than thirty colors to choose from, the new line will enable authorized Duro-Last contractors to provide a standing seam roofing installation to meet virtually any aesthetic requirements.
| Jan 25, 2011
Sherwin-Williams Zero-VOC Claim Misleading, Says BBB
In a move that could prompt industry-wide changes to claims about volatile organic compounds (VOCs), the Better Business Bureau’s National Advertising Division (NAD) has told Sherwin-Williams it should stop marketing its Harmony line of paints as “zero-VOC.” Sherwin-Williams said it will accept NAD’s decision and will take the findings into consideration in its future advertising.
| Jan 7, 2011
How Building Teams Choose Roofing Systems
A roofing survey emailed to a representative sample of BD+C’s subscriber list revealed such key findings as: Respondents named metal (56%) and EPDM (50%) as the roofing systems they (or their firms) employed most in projects. Also, new construction and retrofits were fairly evenly split among respondents’ roofing-related projects over the last couple of years.
| Jan 4, 2011
Product of the Week: Zinc cladding helps border crossing blend in with surroundings
Zinc panels provide natural-looking, durable cladding for an administrative building and toll canopies at the newly expanded Queenstown Plaza U.S.-Canada border crossing at the Niagara Gorge. Toronto’s Moriyama & Teshima Architects chose the zinc alloy panels for their ability to blend with the structures’ scenic surroundings, as well as for their low maintenance and sustainable qualities. The structures incorporate 14,000 sf of Rheinzink’s branded Angled Standing Seam and Reveal Panels in graphite gray.
| Jan 4, 2011
Furniture Sustainability Standard - Approved by ANSI and Released for Distribution
BIFMA International recently announced formal American National Standards Institute (ANSI) approval and release of the ANSI/BIFMA e3-2010 Furniture Sustainability Standard. The e3 standard represents a structured methodology to evaluate the "sustainable" attributes of furniture products and constitutes the technical criteria of the level product certification program.
| Dec 7, 2010
Product of the Week: Petersen Aluminum’s column covers used in IBM’S new offices
IBM’s new offices at Dulles Station West in Herndon, Va., utilized Petersen’s PAC-1000 F Flush Series column covers. The columns are within the office’s Mobility Area, which is designed for a mobile workforce looking for quick in-and-out work space. The majority of workspaces in the office are unassigned and intended to be used on a temporary basis.
| Nov 2, 2010
A Look Back at the Navy’s First LEED Gold
Building Design+Construction takes a retrospective tour of a pace-setting LEED project.
| Nov 2, 2010
Wind Power, Windy City-style
Building-integrated wind turbines lend a futuristic look to a parking structure in Chicago’s trendy River North neighborhood. Only time will tell how much power the wind devices will generate.