flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Press pipe-joining provides valuable savings on potable water installation at Mercy Health – West Hospital

Sponsored Content Plumbing

Press pipe-joining provides valuable savings on potable water installation at Mercy Health – West Hospital

Nelson Stark selected Viega ProPress for the plumbing installation because the system is flameless and can be installed simultaneously with other utilities since there’s no need for welding or grooving equipment.


By Viega | February 22, 2017

Nelson Stark saved time with modular construction.

Nelson Stark used Viega ProPress® to install the plumbing for the construction of Mercy Health – West Hospital in Cincinnati. Plumbers installed a combination of Viega ProPress for stainless pipe and fittings with Viega ProPress copper fittings as well as transition fittings for potable water at the medical facility.

Nelson Stark selected Viega ProPress for the plumbing installation because the system is flameless and can be installed simultaneously with other utilities since there’s no need for welding or grooving equipment.

“Using Viega ProPress allowed us to complete the joining-effort installation with this modularly prepared, innovative type of construction,” said Jeff Read, Vice President at Nelson Stark. “The installers put together each run of pipe for the 150-foot corridors with the fittings, but didn’t press them. Once it was sized and laid out correctly, they attached the fittings to the racks so that when the racks arrived at the hospital construction site all our installers had to do was make the connections.”

The Viega ProPress systems use press fittings to make water-tight and air-tight connections in copper tubing and stainless steel piping. The patented Smart Connect® feature, on all Viega ProPress systems, ensures leak-free connections.

“The project called for 3" and 4" mains from the mechanical room, down the halls and up the entire building tower. From the mains into each room we installed copper tubing and fittings in 2" and smaller,” said Todd Elliot, Project Executive at Nelson Stark. Overall, the plumbing install required more than 3,800' of large-diameter 316 stainless steel pipe and approximately 900 Viega ProPress stainless steel fittings as well as approximately 7,500 Viega ProPress copper fittings and valves.

For West Hospital, Nelson Stark had 60 plumbers installing Viega ProPress in the pre-fabricated method for the main corridors and on site in the individual rooms and public restrooms at the facility.

“Being able to use the same tool to press both stainless steel and copper fittings was a huge benefit,” added Elliot. By using the same tool for stainless, copper and transition fittings, Nelson Stark’s installers saved time and were able to simplify the plumbing installation.

“It was our first time installing Viega ProPress with stainless steel and the hospital was being built on a very tight schedule,” said Wells. “Viega ProPress is obviously quicker from a labor standpoint.”

“There are some unquantifiable advantages that affect the schedule,” explained Read. “We get called because of our reputation to complete projects on or ahead of the schedule.”

“Our customer saved on costs by having fewer hours of labor and using cost-effective stainless,” explained Wells. “The fitting can be installed under flow conditions so there’s no time-consuming process of bleeding a line before doing maintenance work.”

“We’ve installed thousands of Viega ProPress fittings and we’ve had a really good experience in not having leaks,” Elliot added. “We appreciate the huge safety advantage that Viega ProPress provides.”

Click here to read more, or visit www.viega.us

 

ProPress was selected because it is flameless.

Tags

Related Stories

| Oct 13, 2010

Prefab Trailblazer

The $137 million, 12-story, 500,000-sf Miami Valley Hospital cardiac center, Dayton, Ohio, is the first major hospital project in the U.S. to have made extensive use of prefabricated components in its design and construction.

| Oct 13, 2010

Community center under way in NYC seeks LEED Platinum

A curving, 550-foot-long glass arcade dubbed the “Wall of Light” is the standout architectural and sustainable feature of the Battery Park City Community Center, a 60,000-sf complex located in a two-tower residential Lower Manhattan complex. Hanrahan Meyers Architects designed the glass arcade to act as a passive energy system, bringing natural light into all interior spaces.

| Oct 8, 2010

Union Bank’S San Diego HQ awarded LEED Gold

Union Bank’s San Diego headquarters building located at 530 B Street has been awarded LEED Gold certification from the Green Building Certification Institute under the standards established by the U.S. Green Building Council.  Gold status was awarded to six buildings across the United States in the most recent certification and Union Bank’s San Diego headquarters building is one of only two in California.

| Sep 30, 2010

Luxury hotels lead industry in green accommodations

Results from the American Hotel & Lodging Association’s 2010 Lodging Survey showed that luxury and upper-upscale hotels are most likely to feature green amenities and earn green certifications. Results were tallied from 8,800 respondents, for a very respectable 18% response rate. Questions focused on 14 green-related categories, including allergy-free rooms, water-saving programs, energy management systems, recycling programs, green certification, and green renovation.

| Sep 13, 2010

World's busiest land port also to be its greenest

A larger, more efficient, and supergreen border crossing facility is planned for the San Ysidro (Calif.) Port of Entry to better handle the more than 100,000 people who cross the U.S.-Mexico border there each day.

| Sep 13, 2010

Triple-LEED for Engineering Firm's HQ

With more than 250 LEED projects in the works, Enermodal Engineering is Canada's most prolific green building consulting firm. In 2007, with the firm outgrowing its home office in Kitchener, Ont., the decision was made go all out with a new green building. The goal: triple Platinum for New Construction, Commercial Interiors, and Existing Buildings: O&M.

| Aug 11, 2010

Dec 09 BDC AIA/CES exam - Water Efficiency

Public water supplies and treatment facilities in the U.S. consume an average 56 billion kilowatt-hours (kWh) a year-enough electricity to power more than five million homes for an entire year. Moreover, the EPA reports that approximately 4% of the nation's electricity consumption is used for moving or cleaning water and wastewater. The growing awareness of the planet's limited resources and the rapid expansion of the green building movement are compelling Building Teams to employ more water-conserving strategies and plumbing technologies. From rainwater harvesting and graywater recycling systems to integrated water-metering "dashboards," the possibilities are not only intriguing but suggest a manageable and sustainable future.

| Aug 11, 2010

Turner edges out Perkins+Will for the top spot on BD+C's Top 200 Building Team LEED APs ranking

With 1,006 LEED Accredited Professionals on staff, Turner Construction took the top spot on Building Design+Construction’s 2009 ranking of AEC firms with the most LEED APs, published as part of the Giants 300 report. Turner added more than 580 LEED APs during the past year to surpass Perkins+Will, which held the top spot four years running.

boombox1
boombox2
native1

More In Category


Plumbing

EPA to revise criteria for WaterSense faucets and faucet accessories

The U.S. Environmental Protection Agency (EPA) plans to revise its criteria for faucets and faucet accessories to earn the WaterSense label. The specification launched in 2007; since then, most faucets now sold in the U.S. meet or exceed the current WaterSense maximum flow rate of 1.5 gallons per minute (gpm). 



halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021