BRE and the International WELL Building Institute recently published a briefing paper that outlines how Certified BREEAM credits may be used to demonstrate compliance with the WELL Building Standard post-occupation.
The document provides guidance on how pursuing dual certification may be streamlined, and offers information for architects and designers to better understand the requirements and how the two standards relate. It also sets out areas where WELL requirements are addressed by UK and/or EU regulations, and where these can be omitted from an assessment for buildings undergoing a WELL assessment in Europe.
“When you need or want both certification schemes, this document will guide project teams on the most efficient way of going through the process,” says Alan Yates, BREEAM Technical Director. “You won’t need to duplicate evidence or calculate things in different ways, as approximately 35% of credits are equivalent or aligned in some way.”
To obtain a copy of the briefing paper, visit the BREEAM website: www.breeam.com/resources.
Related Stories
Codes and Standards | Jun 21, 2017
World Green Building Council: All buildings must be net zero by 2050 to avert 2°C rise
Building efficiency essential to tempering global climate change.
Codes and Standards | Jun 21, 2017
Senate bill would prohibit tax money for sports stadium projects
Bipartisan legislation would prevent use of municipal bonds by pro teams.
Codes and Standards | Jun 19, 2017
Developer, architect hit with $10 million construction defect verdict
Case pertained to construction of condo development that was not fire code-compliant.
Codes and Standards | Jun 19, 2017
Green building advocates erect icehouses on Penn. state capitol steps to make point on codes
State’s codes have not been updated since 2009.
Codes and Standards | Jun 15, 2017
Cornell Tech unveils plans to reach Net Zero at The Bloomberg Center
Campus plans include photovoltaic arrays and geothermal ground source heat pumps.
Codes and Standards | Jun 13, 2017
Canada Green Building Council and Green Business Certification Inc. announce partnership
New joint venture will deliver enhanced services and support tools and programs throughout Canada.
Codes and Standards | Jun 8, 2017
Nail-Laminated Timber Design and Construction Guide released
New document focuses on design and construction considerations for horizontal NLT applications.
Codes and Standards | Jun 8, 2017
Car sharing popularity means parking zoning and codes may be promoting overbuilding of garages
Some designers look to modular designs in anticipation of alternate uses.
Codes and Standards | Jun 7, 2017
IAPMO advances toward new 2017 Water Efficiency and Sanitation Standard
Revised pipe-sizing method for residential applications will be included.
Codes and Standards | Jun 7, 2017
New Colorado law could stimulate stalled condo market
Construction defect law modifications could ease litigation risk and cut insurance rates.