flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

OSHA updates eye and face protection standards in final rule

Codes and Standards

OSHA updates eye and face protection standards in final rule

Becomes effective April 26.


By Peter Fabris, Contributing Editor | April 20, 2016
OSHA updates eye and face protection standards in final rule

Photo: Dave Thompson/Creative Commons.

The Occupational Safety and Health Administration published a final rule updating requirements for personal protective equipment for workers in general industry, shipyards, longshoring, marine terminals, and construction.

The final rule reflects current national consensus standards, and ensures that workers can use up-to-date eye and face protection, OSHA says. The rule updates references in OSHA’s Eye and Face Protection Standards to recognize the ANSI/ISEA Z87.1-2010, Occupational and Educational Personal Eye and Face Protection Devices, while deleting the outdated 1986 edition of that same national consensus standard. 

OSHA is also retaining the 2003 and 1989 (R-1998) versions of the ANSI standard already referenced in its standard. The final rule updates the construction standard by deleting the 1968 version of the ANSI standard that was referenced and now includes the same three ANSI standards referenced above to ensure consistency among the standards. 

The updated rule becomes effective on April 25, 2016.

Related Stories

| May 17, 2012

New standard for Structural Insulated Panels under development

ASTM International and NTA, Inc. are developing a new standard for Structural Insulated Panels (SIPs) that would create a path for U.S. manufacturers to meet the requirements of the Canadian building code.

| May 17, 2012

Webinar: ‘What Energy Codes and Standards Are Adopted Where and by Whom’

A June 12 webinar by the Construction Specifications Institute will outline what energy codes and standards have been adopted in each of the states for commercial buildings, and what is anticipated to be adopted in the future.

| May 17, 2012

California Governor orders new green standards on state buildings

California Gov. Jerry Brown issued an executive order recently that calls for all new or renovated state buildings of more than 10,000 sf to achieve LEED Silver or higher and incorporate clean, onsite power generation.

| May 17, 2012

New Zealand stadium roof collapse blamed on snow, construction defects

Heavy snowfall, construction defects, and design problems contributed to the collapse of the Stadium Southland roof in New Zealand in September 2010, a report has found.

| May 17, 2012

OSHA launches fall prevention campaign

The Occupational Safety and Health Administration (OSHA) recently launched an educational campaign to prevent deadly falls in the construction industry.

| May 15, 2012

Suffolk selected for Rosenwald Elementary modernization project

The 314-student station elementary school will undergo extensive modernization.

| May 10, 2012

Chapter 6 Energy Codes + Reconstructed Buildings: 2012 and Beyond

Our experts analyze the next generation of energy and green building codes and how they impact reconstruction.

| May 10, 2012

Resilience should be considered a sustainability factor

Since a sustainable building is one you don't have to rebuild, some building sustainability experts believe adding points for "resilience" to storms and earthquakes to the LEED sustainability rating tool makes sense.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021