The Occupational Safety and Health Administration published a final rule updating requirements for personal protective equipment for workers in general industry, shipyards, longshoring, marine terminals, and construction.
The final rule reflects current national consensus standards, and ensures that workers can use up-to-date eye and face protection, OSHA says. The rule updates references in OSHA’s Eye and Face Protection Standards to recognize the ANSI/ISEA Z87.1-2010, Occupational and Educational Personal Eye and Face Protection Devices, while deleting the outdated 1986 edition of that same national consensus standard.
OSHA is also retaining the 2003 and 1989 (R-1998) versions of the ANSI standard already referenced in its standard. The final rule updates the construction standard by deleting the 1968 version of the ANSI standard that was referenced and now includes the same three ANSI standards referenced above to ensure consistency among the standards.
The updated rule becomes effective on April 25, 2016.
Related Stories
Codes and Standards | Mar 7, 2017
Canada’s national building codes will encompass effects of climate change
Forecasted data, not historical data, will be used as the basis for the codes.
Codes and Standards | Mar 6, 2017
ConsensusDocs updates standard short contract editions
The updates address industry changes impacting insurance, legal, technology, and terminology.
Codes and Standards | Mar 3, 2017
ASCE updates standard for structures using tensile membrane
The new sstandard combines guidelines for conventional tensile membrane structures with frame-covered membrane structures.
Codes and Standards | Mar 1, 2017
EPA's 2017 Construction General Permit now in effect
The regulation governs compliance with effluent limits.
Codes and Standards | Feb 28, 2017
Concern grows for high tide flood vulnerability in Mid-Atlantic states
Washington, D.C., and Annapolis, Md., could flood every three days by 2045.
Codes and Standards | Feb 27, 2017
Green building saves operating costs and boosts asset value
A new report shows 14% cost savings and a 7% increase in value when green standards are met.
Codes and Standards | Feb 24, 2017
Scant data hampering energy, water efficiency at sports venues
New NIBS report says baseline information needs further development.
Codes and Standards | Feb 22, 2017
Plans for WELL Building Standard include linkage with other green building standards
The planned updated version will be customizable for any building type.
Codes and Standards | Feb 21, 2017
Aging building code inspectors and government belt-tightening could cause crisis
Inspectors are edging toward retirement with no understudies in place.
Codes and Standards | Feb 20, 2017
AISI publishes three new cold-formed steel framing research reports
Seismic simulation, roof trusses, steel-to-steel and sheathing-to-steel connections are examined in the reports.