flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

OSHA plans multiple revisions to rules impacting construction industry in 2020

Codes and Standards

OSHA plans multiple revisions to rules impacting construction industry in 2020

Cranes and derricks, welding in confined spaces, beryllium exposure, and more on docket.


By Peter Fabris, Contributing Editor | January 6, 2020

Courtesy Pixabay

OSHA is planning new regulations governing several workplace practices that will impact the construction industry in 2020.

OSHA plans to issue a proposed rule in May that would amend parts of the cranes and derricks in construction standard. Revisions will include correcting references to power line voltages, broadening the exclusion for forklifts carrying loads under the forks from “winch or hook” to a “winch and boom.” Revisions would also clarify an exclusion for work activities by articulating cranes.

Other new rules will pertain to communication tower safety, welding in confined spaces, and occupational exposure to beryllium and beryllium compounds. Another set of rules would update the Hazard Communication Standard.

In November, OSHA says it plans to propose rules for post-incident drug testing and safety incentive programs. The agency is also expected to issue a proposed rule regarding personal protective equipment in the construction industry.

Related Stories

Codes and Standards | Nov 28, 2021

Efficient electric water heaters in multifamily buildings significantly reduce carbon emissions

In buildings with 5+ units, water heating uses more energy than space heating, cooling, or lighting.

Codes and Standards | Nov 23, 2021

New York’s Labor Law Section 240 and how it affects general contractors

The ‘Scaffold Law’ was first enacted by the New York State Legislature in 1885 and is one of the single most-used laws in construction accident cases.

Codes and Standards | Nov 22, 2021

ABC’s Construction Technology Report finds focus on solving operational problems

More than half rely on project management software.

Codes and Standards | Nov 22, 2021

Contractors say 811 utility location system has significant flaws

More than half of firms in survey report damages, near misses because lines were unmarked or marked incorrectly.

Codes and Standards | Nov 19, 2021

Creating net-zero/net-positive buildings is top priority in Green Building Trends 2021 report

Findings also demonstrate compelling business case for building green.

Codes and Standards | Nov 19, 2021

Construction Startup Competition 2021 awards highlight tech innovations

AI-powered software to identify and explain critical issues in construction contracts takes top prize.

Codes and Standards | Nov 18, 2021

Infrastructure bill contains $5 billion for energy efficiency in buildings

Wide range of programs to reduce energy use, improve materials, train workers.

Codes and Standards | Nov 17, 2021

Skanska will provide embodied carbon assessments on all new projects over 53,000 sf

Will use the Embodied Carbon in Construction Calculator it helped create.

Codes and Standards | Nov 16, 2021

NOAA, Univ. of Maryland, and ASCE partner on climate-smart engineering codes, standards

Efforts will account for climate change in future infrastructure design and construction.

Codes and Standards | Nov 15, 2021

Intl. Code Council and Modular Building Institute release new off-site construction standards

‘Will create consistency for off-site construction; accelerate the industry’.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021