flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

OSHA plans multiple revisions to rules impacting construction industry in 2020

Codes and Standards

OSHA plans multiple revisions to rules impacting construction industry in 2020

Cranes and derricks, welding in confined spaces, beryllium exposure, and more on docket.


By Peter Fabris, Contributing Editor | January 6, 2020

Courtesy Pixabay

OSHA is planning new regulations governing several workplace practices that will impact the construction industry in 2020.

OSHA plans to issue a proposed rule in May that would amend parts of the cranes and derricks in construction standard. Revisions will include correcting references to power line voltages, broadening the exclusion for forklifts carrying loads under the forks from “winch or hook” to a “winch and boom.” Revisions would also clarify an exclusion for work activities by articulating cranes.

Other new rules will pertain to communication tower safety, welding in confined spaces, and occupational exposure to beryllium and beryllium compounds. Another set of rules would update the Hazard Communication Standard.

In November, OSHA says it plans to propose rules for post-incident drug testing and safety incentive programs. The agency is also expected to issue a proposed rule regarding personal protective equipment in the construction industry.

Related Stories

| May 17, 2012

New standard for Structural Insulated Panels under development

ASTM International and NTA, Inc. are developing a new standard for Structural Insulated Panels (SIPs) that would create a path for U.S. manufacturers to meet the requirements of the Canadian building code.

| May 17, 2012

Webinar: ‘What Energy Codes and Standards Are Adopted Where and by Whom’

A June 12 webinar by the Construction Specifications Institute will outline what energy codes and standards have been adopted in each of the states for commercial buildings, and what is anticipated to be adopted in the future.

| May 17, 2012

California Governor orders new green standards on state buildings

California Gov. Jerry Brown issued an executive order recently that calls for all new or renovated state buildings of more than 10,000 sf to achieve LEED Silver or higher and incorporate clean, onsite power generation.

| May 17, 2012

New Zealand stadium roof collapse blamed on snow, construction defects

Heavy snowfall, construction defects, and design problems contributed to the collapse of the Stadium Southland roof in New Zealand in September 2010, a report has found.

| May 17, 2012

OSHA launches fall prevention campaign

The Occupational Safety and Health Administration (OSHA) recently launched an educational campaign to prevent deadly falls in the construction industry.

| May 15, 2012

Suffolk selected for Rosenwald Elementary modernization project

The 314-student station elementary school will undergo extensive modernization.

| May 10, 2012

Chapter 6 Energy Codes + Reconstructed Buildings: 2012 and Beyond

Our experts analyze the next generation of energy and green building codes and how they impact reconstruction.

| May 10, 2012

Resilience should be considered a sustainability factor

Since a sustainable building is one you don't have to rebuild, some building sustainability experts believe adding points for "resilience" to storms and earthquakes to the LEED sustainability rating tool makes sense.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021