flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

OSHA finalizes new silica dust regulations

Codes and Standards

OSHA finalizes new silica dust regulations

Construction industry has until June 2017 to comply.


By Peter Fabris, Contributing Editor | March 25, 2016
OSHA finalizes new silica dust regulations

Photo: Pixabay.

The Occupational Safety and Health Administration has announced a final rule to improve protections for workers exposed to respirable silica dust

OSHA says the rule will help prevent lung cancer, silicosis, chronic obstructive pulmonary disease, and kidney disease in workers by limiting their exposure to respirable crystalline silica. The final rule is written as two standards, one for construction and one for general industry and maritime.

Construction companies have until June 23, 2017 to comply with most requirements. New requirements include:

  • Reducing the permissible exposure limit for crystalline silica to 50 micrograms per cubic meter of air, averaged over an eight-hour shift.
  • Mandating employers to use engineering controls (such as water or ventilation) and provide respiratory protection when controls are not able to limit exposures to the permissible level 
  • Limit access to high exposure areas 
  • Train workers
  • Provide medical exams to highly exposed workers.

OSHA says the new regulations, which replace ones established in 1971, provide greater certainty and ease of compliance to construction employers – including many small employers – by including a table of specified controls they can follow to be in compliance without having to monitor exposures. More information is available here.

Related Stories

Codes and Standards | Feb 17, 2022

Pandemic won’t alter urban planning

City planners focused on returning to ‘old normal’.

Codes and Standards | Feb 16, 2022

California court rules affordable housing developers exempt from local zoning

Case could set precedent on state law that overrides local rules.

Codes and Standards | Feb 15, 2022

FORTIFIED resiliency standard expanded to include multifamily sector

Voluntary, beyond-code program aims to protect buildings from severe weather.

Codes and Standards | Feb 10, 2022

Number of Americans at risk of flooding to double in 30 years

Most new risk from new development, not climate change.

Codes and Standards | Feb 10, 2022

Intl. Code Council committee on diversity seeks applicants

New board aims to increase diversity in the membership association.

Codes and Standards | Feb 9, 2022

Climate impact of gas stoves in U.S. equal to half a million cars

New study could increase momentum to ban fossil fuels in new buildings.

Codes and Standards | Feb 7, 2022

Energy efficiency ratings not reflecting true energy use

Highest rated U.K. buildings are less efficient than lower rated ones.

Codes and Standards | Feb 3, 2022

Illinois tops USGBC list of states with the most LEED certified projects in 2021

Top 10 states plus D.C. certified more than 247 million gross square feet.

Codes and Standards | Feb 2, 2022

Public works contracting reform advances in New York State

Governor signs bill to form advisory council that will propose policy changes.

Codes and Standards | Feb 2, 2022

Commercial and multifamily construction starts rebounded in 2021

Following COVID uncertainty in 2020, the industry recovered, but still lags 2019 levels.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021