The National Ready Mix Concrete Association has updated its industry average environmental impacts for concrete.
The aim is to provide product transparency within green building standards. The second version of the NRMCA Industry-Wide (IW) Environmental Product Declaration (EPD) and Benchmark (Industry Average) Report discloses the environmental impacts of concrete manufacturing for a wide range of concrete products.
The updated document includes additional member companies, concrete plants, and concrete mixes. Similar to the original, the new NRMCA IW EPD lists impacts for concrete ranging compressive strengths from 2,500 psi through 8,000 psi, covering most concrete used in residential, commercial, and public construction.
A wide range of products are covered for each strength class; from 100% portland cement mixes to mixes with over 50% replacement with fly ash and slag cement. Lightweight concrete mix designs have also been added in the new version.
The IW EPD now includes 88 companies, 2,519 plants, and 72 mixes offering enhanced data for baselines and resulting in significant national coverage and production. LEED v4 includes a credit that encourages a project team to use building materials that have EPDs.
Related Stories
Codes and Standards | Dec 8, 2021
Proposals to add more multifamily to Atlanta prompt drive for Buckhead to secede
City aims to increase housing as projections point to sharp population increase.
Codes and Standards | Dec 7, 2021
Design problems now the primary cause of construction claims and disputes
More likely to occur due to more tight timescales imposed upon third parties engaged in design.
Codes and Standards | Dec 5, 2021
New standard for Phase I environmental reports requires more research work on many sites
Update affects around 250,000 commercial real estate transactions a year.
Codes and Standards | Nov 30, 2021
Dept. of Energy publishes RFP for technical assistance on supporting better building codes
Addresses advanced standards to reduce energy consumption and GHG emissions.
Codes and Standards | Nov 29, 2021
Ithaca, N.Y., votes to electrify, decarbonize all its buildings
First initiative of its kind in U.S.
Codes and Standards | Nov 29, 2021
FAA seeking design of air traffic control towers of the future
Call for design submissions for safe, efficient structures.
Codes and Standards | Nov 28, 2021
Efficient electric water heaters in multifamily buildings significantly reduce carbon emissions
In buildings with 5+ units, water heating uses more energy than space heating, cooling, or lighting.
Codes and Standards | Nov 23, 2021
New York’s Labor Law Section 240 and how it affects general contractors
The ‘Scaffold Law’ was first enacted by the New York State Legislature in 1885 and is one of the single most-used laws in construction accident cases.
Codes and Standards | Nov 22, 2021
ABC’s Construction Technology Report finds focus on solving operational problems
More than half rely on project management software.
Codes and Standards | Nov 22, 2021
Contractors say 811 utility location system has significant flaws
More than half of firms in survey report damages, near misses because lines were unmarked or marked incorrectly.
