The National Ready Mix Concrete Association has updated its industry average environmental impacts for concrete.
The aim is to provide product transparency within green building standards. The second version of the NRMCA Industry-Wide (IW) Environmental Product Declaration (EPD) and Benchmark (Industry Average) Report discloses the environmental impacts of concrete manufacturing for a wide range of concrete products.
The updated document includes additional member companies, concrete plants, and concrete mixes. Similar to the original, the new NRMCA IW EPD lists impacts for concrete ranging compressive strengths from 2,500 psi through 8,000 psi, covering most concrete used in residential, commercial, and public construction.
A wide range of products are covered for each strength class; from 100% portland cement mixes to mixes with over 50% replacement with fly ash and slag cement. Lightweight concrete mix designs have also been added in the new version.
The IW EPD now includes 88 companies, 2,519 plants, and 72 mixes offering enhanced data for baselines and resulting in significant national coverage and production. LEED v4 includes a credit that encourages a project team to use building materials that have EPDs.
Related Stories
| Sep 11, 2013
White paper examines Joint Commission requirements for NFPA codes in healthcare
The healthcare industry has experienced great attention from The Joint Commission concerning fire and life safety issues.
| Sep 11, 2013
San Francisco expected to drop firefighter air tank refilling station rule for skyscrapers
San Francisco is poised to drop a requirement that skyscrapers have refill stations so firefighters can recharge their air tanks during a blaze. The city has required that new high-rises have the air refill systems for about ten years.
| Sep 5, 2013
State legislatures continue to raise the bar on green school construction
Since the beginning of 2013, the USGBC has followed more than 125 bills across 34 states that seek to advance healthy, high-performing schools.
| Sep 5, 2013
Construction industry groups create coalition to respond to new OSHA silica rule
A group of 11 construction trade associations has created the Construction Industry Safety Coalition in response to the Occupational Safety and Health Administration’s (OSHA) proposed rule on silica for the construction industry.
| Sep 5, 2013
Red tape delays California county jail construction projects
California authorized $1.2 billion for jail construction in 2007, but not a single county in the state has completed a jail project since then.
| Sep 5, 2013
New CM-at-risk and design-build options create controversy in Ohio
Some contractors say Ohio's new system puts small and midsize construction companies at a disadvantage.
| Sep 5, 2013
Outdated codes slowed disaster recovery in Tuscaloosa, Ala.
Outdated building codes and lack of a master plan slowed the initial rebuilding stage after a devastating tornado leveled parts of Tuscaloosa, Ala. in 2011, according to the city’s mayor.
| Aug 28, 2013
Building collapse prompts legislation to beef up demolition regulations in Philadelphia
Philadelphia City Council will introduce legislation next month to strengthen the regulation of building demolition practices.
| Aug 28, 2013
Rules requiring contractors to boost hiring of veterans criticized
Some businesses are pushing back against proposed rules requiring federal contractors to step up their hiring of returning military service personnel.
| Aug 28, 2013
OSHA moves to reduced exposure to crystalline silica
Under a proposal from the Occupational Safety and Health Administration, the new permissible exposure limit to crystalline silica per cubic meter of air could be changed from 250 micrograms to 50 micrograms.