The National Ready Mix Concrete Association has updated its industry average environmental impacts for concrete.
The aim is to provide product transparency within green building standards. The second version of the NRMCA Industry-Wide (IW) Environmental Product Declaration (EPD) and Benchmark (Industry Average) Report discloses the environmental impacts of concrete manufacturing for a wide range of concrete products.
The updated document includes additional member companies, concrete plants, and concrete mixes. Similar to the original, the new NRMCA IW EPD lists impacts for concrete ranging compressive strengths from 2,500 psi through 8,000 psi, covering most concrete used in residential, commercial, and public construction.
A wide range of products are covered for each strength class; from 100% portland cement mixes to mixes with over 50% replacement with fly ash and slag cement. Lightweight concrete mix designs have also been added in the new version.
The IW EPD now includes 88 companies, 2,519 plants, and 72 mixes offering enhanced data for baselines and resulting in significant national coverage and production. LEED v4 includes a credit that encourages a project team to use building materials that have EPDs.
Related Stories
Codes and Standards | Mar 7, 2017
Canada’s national building codes will encompass effects of climate change
Forecasted data, not historical data, will be used as the basis for the codes.
Codes and Standards | Mar 6, 2017
ConsensusDocs updates standard short contract editions
The updates address industry changes impacting insurance, legal, technology, and terminology.
Codes and Standards | Mar 3, 2017
ASCE updates standard for structures using tensile membrane
The new sstandard combines guidelines for conventional tensile membrane structures with frame-covered membrane structures.
Codes and Standards | Mar 1, 2017
EPA's 2017 Construction General Permit now in effect
The regulation governs compliance with effluent limits.
Codes and Standards | Feb 28, 2017
Concern grows for high tide flood vulnerability in Mid-Atlantic states
Washington, D.C., and Annapolis, Md., could flood every three days by 2045.
Codes and Standards | Feb 27, 2017
Green building saves operating costs and boosts asset value
A new report shows 14% cost savings and a 7% increase in value when green standards are met.
Codes and Standards | Feb 24, 2017
Scant data hampering energy, water efficiency at sports venues
New NIBS report says baseline information needs further development.
Codes and Standards | Feb 22, 2017
Plans for WELL Building Standard include linkage with other green building standards
The planned updated version will be customizable for any building type.
Codes and Standards | Feb 21, 2017
Aging building code inspectors and government belt-tightening could cause crisis
Inspectors are edging toward retirement with no understudies in place.
Codes and Standards | Feb 20, 2017
AISI publishes three new cold-formed steel framing research reports
Seismic simulation, roof trusses, steel-to-steel and sheathing-to-steel connections are examined in the reports.
