flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

North Carolina’s code policies likely worsened damage caused by Hurricane Helene

Codes and Standards

North Carolina’s code policies likely worsened damage caused by Hurricane Helene

Legislature rejected updates that would have limited construction on steep slopes


By Peter Fabris, Contributing Editor | October 16, 2024
North Carolina’s code policies likely worsened damage caused by Hurricane Helene, Photo: Pixabay
Photo: Pixabay

The North Carolina Legislature’s rejection of building code updates likely worsened the damage caused by Hurricane Helene, code experts say.

Over the past 15 years, lawmakers rejected limits on construction on steep slopes, which might have reduced the number of homes destroyed by landslides. The legislature also blocked a rule requiring homes to be elevated above the height of an expected flood and weakened protections for wetlands that help the environment absorb stormwater runoff.

Lawmakers have slowed building code updates, making it harder for the state to qualify for federal climate-resilience grants. In 2013, the legislature changed how often North Carolina would update its codes to every six years from every three.

The change proved important. In 2015, the International Code Council added a requirement that new homes in flood zones be built at least one foot above the projected height of a major flood. Instead of adopting that mandate statewide, the legislature left it up to local officials to decide whether to adopt it in their community.

Related Stories

| Nov 23, 2011

Fenestration council seeks committee members

The National Fenestration Rating Council (NFRC) is seeking members for a committee to pursue recognition of its ratings procedures from the American National Standard Institute (ANSI).

| Nov 23, 2011

Obama signs repeal of 3% withholding on government contracts

President Obama signed a bill that repeals a law requiring governments to withhold 3% of payments over $10,000 to contractors.

| Nov 23, 2011

USGBC launches app lab for LEED certification process

The U.S. Green Building Council has released the App Lab, a searchable catalog of third-party apps that are integrated with LEED data.

| Nov 23, 2011

Document gives advice on stormwater runoff management

The report, “Rooftops to Rivers II,” provides tips on how cities can use smart infrastructure and green building design to minimize pollution from stormwater runoff and other wastewaters.

| Nov 23, 2011

Zoning changes proposed to make New York City buildings greener

New York City will introduce new zoning proposals next month that would make it easier for building owners to add features that will make their properties more sustainable.

| Nov 18, 2011

AGC offers webinar on Davis-Bacon compliance

Webinar to be held in two sessions, Dec. 7 and 8 from 2:00-3:30 p.m. EST.

| Nov 18, 2011

New green construction code may help push LEED standards higher

The International Green Construction Code (IgCC) is expected to set a floor for building standards and may create the opportunity for LEED certifications to push toward higher ceilings.

| Nov 18, 2011

New OSHA fall safety rule could save contractors money on insurance premiums

The new Occupational Safety and Health Administration rule requiring employers operating in the residential construction industry to use the same methods of fall protection that historically have been used in the commercial construction industry could save them money.

| Nov 18, 2011

Some believe new Austin building code will help mom and pop shops

Austin, Texas has proposed building codes that require wider sidewalks and call for buildings to be closer to sidewalks along a 3.5-mile stretch of highway.

| Nov 11, 2011

AIA: Engineered Brick + Masonry for Commercial Buildings

Earn 1.0 AIA/CES learning units by studying this article and successfully completing the online exam. 

boombox1
boombox2
native1

More In Category


3D Printing

3D-printed construction milestones take shape in Tennessee and Texas

Two notable 3D-printed projects mark milestones in the new construction technique of “printing” structures with specialized concrete. In Athens, Tennessee, Walmart hired Alquist 3D to build a 20-foot-high store expansion, one of the largest freestanding 3D-printed commercial concrete structures in the U.S. In Marfa, Texas, the world’s first 3D-printed hotel is under construction at an existing hotel and campground site.


MFPRO+ News

San Francisco unveils guidelines to streamline office-to-residential conversions

The San Francisco Department of Building Inspection announced a series of new building code guidelines clarifying adaptive reuse code provisions and exceptions for converting office-to-residential buildings. Developed in response to the Commercial to Residential Adaptive Reuse program established in July 2023, the guidelines aim to increase the viability of converting underutilized office buildings into housing by reducing regulatory barriers in specific zoning districts downtown. 


halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021