Greenhouse gas (GHG) emissions from using Chinese steel in the U.S. are significantly greater than that of comparable steel made in North America, according to a series of reports by the Steel Market Development Institute (SMDI), a business unit of the American Iron and Steel Institute (AISI).
Two peer-reviewed reports (one in North America and another in China) compared hot-dip galvanized (HDG) steel coils produced in North America to the same product produced in China and shipped to the North American market. This type of steel is primarily used in the construction and automotive sectors.
The study found that hot-dip galvanized coil sourced from China results in nearly 50% higher GHG emissions. “In the sustainable design of steel-framed buildings, one of the most important decisions an owner or architect can make regarding environmental impact is to ensure the building’s steel is produced in North America,” said Mark Thimons, vice president of sustainability for SMDI.
Thimons cited an example from another SMDI study involving the design of a four-story cold-formed steel office building in Minneapolis in which the building core and shell includes about 100 tons of HDG. If steel from China was used for this building instead of North American-produced steel, the GHG emissions associated with the production of the steel would increase by more than 100 tons (CO2eq).
Related Stories
Codes and Standards | Mar 29, 2018
Contractors have paid $5.2 million for failing local resident employee mandate on Detroit arena
Companies were only able to meet half of the 51% local worker requirement over course of the project.
Codes and Standards | Mar 28, 2018
Washington State moving to promote mass timber construction with legislation
Bill would require all 12-story or less public buildings to be built with mass timber.
Codes and Standards | Mar 27, 2018
Los Angeles appoints its first chief design officer
Responsibility for enhancing civic architecture and urban design.
Codes and Standards | Mar 26, 2018
National Roofing Contractors Assn., releases updates to its Roof Wind Designer app
Significant changes to online wind-load calculator.
Codes and Standards | Mar 22, 2018
Global construction waste to almost double by 2025
Concerns in Houston, Minnesota over environmental impacts.
Codes and Standards | Mar 21, 2018
Cape Town, South Africa’s dire water supply crisis raises concerns in the U.S.
Los Angeles, Salt Lake City, and Miami among cities at risk for water shortages.
Codes and Standards | Mar 20, 2018
Report shows how LEED certification supports net zero energy
Whole-building energy simulation, ASHRAE compliance requirement are key factors.
Codes and Standards | Mar 15, 2018
Energy efficiency measures contributing to flat demand for power
Utilities having difficulty adjusting to new business environment.
Codes and Standards | Mar 14, 2018
New parking lighting technology is paying off, Energy Dept. says
Newer products can cut energy costs by as much as 70%.
Codes and Standards | Mar 13, 2018
OSHA delays enforcement of beryllium exposure rule
The Occupational Safety and Health Administration (OSHA) voted to delay new beryllium exposure rules until May 11.