Due to the weather-related slow start in the nonresidential building market during the first part of the year, and the prolonged weakness in the institutional sector, construction spending projections for the rest of the year have been lowered slightly.
The commercial construction sector is still looking at solid spending increases throughout the remainder of 2014, paced by high levels of demand for hotels and office buildings. The American Institute of Architects’ (AIA) semi-annual Consensus Construction Forecast, a survey of the nation’s leading construction forecasters, is projecting that spending will see a 4.9% increase in 2014 – down from the previous estimate of 5.8%, with next year’s projection holding at 8%.
VIDEO: AIA Chief Economist discusses economic trends for 3rd quarter of 2014
“The institutional market has been a drag on the overall recovery for the design and construction industry for the last few years, and until we see state and local governments ramp up spending for new education, healthcare and public safety structures there likely won’t be a widespread acceleration in spending for the entire industry,” said AIA Chief Economist, Kermit Baker, PhD, Hon. AIA. “But we continue to have an optimistic outlook for the commercial and industrial sectors both for the rest of this year and into 2015.”
Market Segment Consensus Growth Forecasts |
2014 |
2015 |
|
|
|
Overall nonresidential building |
4.9% |
8.0% |
|
|
|
Commercial / industrial |
9.9% |
11.2% |
Hotels |
14.5% |
9.2% |
Office buildings |
12.8% |
13.3% |
Industrial facilities |
7.6% |
9.2% |
Retail |
7.4% |
10.4% |
|
|
|
Institutional |
-0.1% |
5.8% |
Amusement / recreation |
3.7% |
6.6% |
Education |
-0.1% |
5.7% |
Healthcare facilities |
-1.8% |
6.6% |
Religious |
-4.1% |
0.7% |
Public safety |
-4.2% |
3.3% |
Baker continued, “While there does not appear to be any structural frailties in the overall economy that could possibly derail increasing levels of construction spending over the next 18 months, lending standards at financial institutions continue to fall well short of the increasing demand for commercial real estate loans, which is another factor that serves as a wild card and a source of concern for the entire industry.”
About the AIA Consensus Construction Forecast Panel
The AIA Consensus Construction Forecast Panel is conducted twice a year with the leading nonresidential construction forecasters in the United States including, McGraw Hill Construction, Wells Fargo Securities, IHS-Global Insight, Moody’s economy.com, Reed Business Information, Associated Builders & Contractors and FMI. The purpose of the Consensus Construction Forecast Panel is to project business conditions in the construction industry over the coming 12 to 18 months. The Consensus Construction Forecast Panel has been conducted for 15 years.
About The American Institute of Architects
Founded in 1857, members of the American Institute of Architects consistently work to create more valuable, healthy, secure, and sustainable buildings, neighborhoods, and communities. Through nearly 300 state and local chapters, the AIA advocates for public policies that promote economic vitality and public well being. Members adhere to a code of ethics and conduct to ensure the highest professional standards. The AIA provides members with tools and resources to assist them in their careers and business as well as engaging civic and government leaders, and the public to find solutions to pressing issues facing our communities, institutions, nation and world. Visit www.aia.org.
Related Stories
| Aug 11, 2010
Report: Building codes and regulations impede progress toward uber-green buildings
The enthusiasm for super green Living Buildings continues unabated, but a key stumbling block to the growth of this highest level of green building performance is an existing set of codes and regulations. A new report by the Cascadia Region Green Building Council entitled "Code, Regulatory and Systemic Barriers Affecting Living Building Projects" presents a case for fundamental reassessment of building codes.
| Aug 11, 2010
Call for entries: Building enclosure design awards
The Boston Society of Architects and the Boston chapter of the Building Enclosure Council (BEC-Boston) have announced a High Performance Building award that will assess building enclosure innovation through the demonstrated design, construction, and operation of the building enclosure.
| Aug 11, 2010
Portland Cement Association offers blast resistant design guide for reinforced concrete structures
Developed for designers and engineers, "Blast Resistant Design Guide for Reinforced Concrete Structures" provides a practical treatment of the design of cast-in-place reinforced concrete structures to resist the effects of blast loads. It explains the principles of blast-resistant design, and how to determine the kind and degree of resistance a structure needs as well as how to specify the required materials and details.
| Aug 11, 2010
ACSA announces 2008-2009 ACSA/AISC steel design student competition winners
The Association of Collegiate Schools of Architecture (ACSA) is pleased to announce the winners of the ninth annual steel design student competition for the 2008-2009 academic year. Administered by the Association of Collegiate Schools of Architecture (ACSA) and sponsored by the American Institute of Steel Construction (AISC), the program challenged students, working individually or in teams, to explore a variety of design issues related to the use of steel in design and construction.
| Aug 11, 2010
ZweigWhite Announces 2009 Best Firms to Work For
Management consulting and research firm ZweigWhite has identified the best civil engineering, structural engineering, multidiscipline A/E services, environmental services, and architecture firms to work for in its annual ranking of top industry firms. These outstanding employers were selected based on their commitment to provide a positive work environment and challenging and interesting work opportunities for their employees.
| Aug 11, 2010
Autodesk 2010 Certification Now Available for Design Professionals
Autodesk, Inc., (Nasdaq: ADSK), today announced that design and engineering professionals can become Autodesk Certified in AutoCAD 2010, Autodesk Inventor 2010, Autodesk Revit Architecture 2010, and AutoCAD Civil 3D 2010 software. Becoming Autodesk Certified allows professionals, and companies boasting Autodesk Certified employees, to validate their industry skills and knowledge, demonstrate expertise and gain credibility.
| Aug 11, 2010
Jacobs, CH2M Hill, AECOM top BD+C's ranking of the 75 largest federal government design firms
A ranking of the Top 75 Federal Government Design Firms based on Building Design+Construction's 2009 Giants 300 survey. For more Giants 300 rankings, visit http://www.BDCnetwork.com/Giants