GREENBELT, Md. (November 15, 2010) – The NFRC Board of Directors has approved technical procedures for the development of U-factor, solar heat gain coefficient (SHGC), and visible transmittance (VT) ratings for co-planar interior and exterior attachment products.
The new procedures, approved by unanimous voice vote last week at NFRC’s Fall Membership Meeting in San Francisco, will add co-planar attachments such as blinds and shades to the group’s existing portfolio of windows, doors, skylights, curtain walls, and window film.
“Approval of technical procedures for determining ratings for attachments represents a big step toward providing consumers of those products with the fair, accurate, and credible energy performance information they need to make informed choices,” said NFRC CEO Jim Benney.
NFRC 100A explains the procedures for determining fenestration attachment product U-factor ratings, while NFRC 200A describes the procedures for determining fenestration attachment product SHGC and VT ratings.
NFRC is also working on certification and labeling procedures for attachment products. Once those procedures are approved, attachment product manufacturers will be able to rate and certify their products.
NFRC has rated window film since 2008, when CPFilms became the first film manufacturer to certify a product.
“I’m very pleased that the Board approved the technical documents for attachment products,” said Mike Cienian, chair of the Attachments Subcommittee and vice president for quality assurance at HunterDouglas, a member of the Window Covering Manufacturers Association. “Our industry is eager to provide our customers with the kind of third-party performance information that NFRC provides, and we look forward to finalizing the certification and labeling side so we can begin certifying products.”
About NFRC
NFRC is a non-profit organization that administers a voluntary, uniform rating, labeling, and certification system that can be used to compare the energy performance of windows, doors, curtain walls, skylights, and other fenestration products. Its members include manufacturers, suppliers, utilities, consumer groups, representatives from the building and code industries, scientific and educational organizations, and government agencies.
Related Stories
Architects | May 17, 2015
NCARB wants the title ‘architect’ confined to those who are licensed
The Council is urging state licensing boards to come up with a substitute for the pre-licensure title ‘Intern.’
Museums | May 13, 2015
The museum of tomorrow: 8 things to know about cultural institutions in today’s society
Entertainment-based experiences, personal journeys, and community engagement are among the key themes that cultural institutions must embrace to stay relevant, write Gensler's Diana Lee and Richard Jacob.
Industrial Facilities | May 11, 2015
SOM-designed Manufacturing and Design Innovation Institute opens in Chicago
The new space will be a place for academia, industries, and civic bodies to collaborate.
Sponsored | Roofing | May 11, 2015
How architects can tap into the expertise of their metal roof manufacturer, part 2
Here are three things metal roof manufacturers can do to help the architect
BIM and Information Technology | May 10, 2015
How beacons will change architecture
Indoor positioning is right around the corner. Here is why it matters.
Architects | May 10, 2015
Harness the connection between managing risk and increasing profitability, Part 2
In Part 1, we covered taking control of the submittals schedule and managing RFIs. Let’s move on to properly allocating substitutions and limiting change orders.
Architects | May 10, 2015
Harness the connection between managing risk and increasing profitability, Part 1
AE firms need to protect themselves against vague contractual and procedural situations during all phases of the project in order to minimize their liability and exposure to risk, writes AEC industry consultant Steve Whitehorn.
Building Team | May 8, 2015
Construction industry adds 45,000 jobs in April
The construction industry saw an increase in jobs during the month of April after losing approximately 9,000 positions in March.
Building Team | May 8, 2015
Surety bond forms specifically for design-build projects now available
The documents are the first of their kind to be coauthored by designers and builders.
High-rise Construction | May 6, 2015
Parks in the sky? Subterranean bike paths? Meet the livable city, designed in 3D
Today’s great cities must be resilient—and open—to many things, including the influx of humanity, writes Gensler co-CEO Andy Cohen.
