flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

New York State renews design-build authority

Codes and Standards

New York State renews design-build authority

Five state agencies are allowed to use design-build on certain projects.


By Peter Fabris, Contributing Editor | April 22, 2015
New York State renews design-build authority

The state first approved design-build in 2011, and has entered into dozens of design-build contracts in the interim. Image: Wikimedia Commons

The New York State Legislature passed a budget for 2015-2016 that included a two-year renewal of design-build authority for select agencies.

The governor supports the measure. The state first approved design-build in 2011, and has entered into dozens of design-build contracts in the interim.

As in the 2011 legislation, design/build can only be used by the following agencies:
• Thruway authority
• Department of Transportation
• Office of Parks, Recreation and Historic Preservation
• Department of Environmental Conservation
• New York State Bridge Authority

Funding will support a statewide initiative to finance large-scale, complex infrastructure projects across the state and allow “innovative project delivery methods, including design-build and public-private partnerships.”

Related Stories

| Apr 17, 2013

LEED 2009 quarterly interpretations, addenda now available

Quarterly interpretations and addenda to the LEED 2009 rating systems and reference guides are now available.

| Apr 17, 2013

DOE’s Lawrence Berkeley Lab researchers developing new indoor air pollution standards

The U.S. Department of Energy’s Lawrence Berkeley National Laboratory (Berkeley Lab) researchers are working on new building standards after discovering previously unknown indoor air pollutants.

| Apr 16, 2013

RMJM acquired by Duthus Investments for ÂŁ12 million

  Sir Fraser Morrison, the owner and chairman of architect RMJM, is the backer behind the investment firm that bought RMJM for £11m in late March.

| Apr 10, 2013

ASHRAE publishes second edition to HVAC manual for healthcare facilities

The American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) has published a second edition of its “HVAC Design Manual for Hospitals and Clinics.”

| Apr 10, 2013

Concrete Reinforcing Steel Institute accredited by ANSI as standards developer

The Concrete Reinforcing Steel Institute (CRSI) was recently accredited by the American National Standards Institute (ANSI) as an ANSI Accredited Standards Developer (ASD).

| Apr 10, 2013

DOD should continue LEED-Silver or equivalent rating standard, says NRC

The Department of Defense should continue to require that its new buildings or major renovations to facilities be designed to achieve a LEED-Silver or equivalent rating, says a new report from the National Research Council.

| Apr 10, 2013

EPA proposes emissions rules affecting light construction vehicles

The Environmental Protection Agency has proposed air-pollution standards that it says will reduce the amount of sulfur in U.S. gasoline by two-thirds and impose fleet-wide pollution limits on new vehicles.

| Apr 10, 2013

New skyscraper designs raising the bar on green standards

Though most new skyscraper designs have a traditional look, they are including a wider array of sustainable elements to use energy and water more efficiently and improve human health.

| Apr 5, 2013

Lack of national standards on design of bioterror labs creates higher risk for accidents, panel says

U.S. labs that conduct research on bioterror germs such as anthrax are at risk for accidents because they do not have uniform design and operation standards, according to a Congressional investigative group.

| Apr 5, 2013

Builders Hardware Manuf. Assn. revises three standards for hinges, locks, and latches

The Builders Hardware Manufacturers Association (BHMA) released three new revisions to the ANSI/BHMA standardsfor hinges, interconnected locks, and sliding and folding hardware.

boombox1
boombox2
native1

More In Category

Warehouses

California bill would limit where distribution centers can be built

A bill that passed the California legislature would limit where distribution centers can be located and impose other rules aimed at reducing air pollution and traffic. Assembly Bill 98 would tighten building standards for new warehouses and ban heavy diesel truck traffic next to sensitive sites including homes, schools, parks and nursing homes.




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021

Â