A Troy, N.Y., man has been indicted for allegedly posing as a licensed architect in order to secure work on a half-dozen building projects around the Albany area.
Paul J. Newman of Cohesion Studios Inc. has been charged with defrauding construction companies, business owners, and local governments. The New York Attorney General's office alleges that Newman drafted architectural renderings for more than 100 properties including some for multiple large housing projects.
Newman also allegedly submitted foundation inspections, field reports, energy compliance certificates, and engineer letters to multiple towns and cities falsely certifying that he was a licensed architect. The state attorney general’s office alleges that Newman forged state a Registered Architect stamp or Professional Engineer stamp crafted from registration numbers and signatures borrowed from an actual architect and engineer.
Newman reportedly was assessed a $4,500 fine by the Florida Board of Architecture and Interior Design for doing work on a church project without the proper licensing. Newman is the sole employee of Cohesion Studios, according to prosecutors. Newman allegedly did work in a number of other states and places, including Puerto Rico and Brazil. He could receive a sentence of 15 years in prison if convicted of the most serious charge.
Related Stories
| Nov 16, 2012
South Dakota prefers LEED over building code on state projects
“(LEED is) much better than a mandatory building code because you get a little wiggle room in these projects,” said Mike Mueller, a spokesman for the South Dakota Bureau of Administration.
| Nov 16, 2012
AAMA publishes quality assurance guidelines for Polyamide Thermal Barriers
The American Architectural Manufacturers Association (AAMA) has published QAG-2-12, Voluntary Quality Assurance Processing Guide for Polyamide Thermal Barriers.
| Nov 16, 2012
New ANSI/BIFMA standards developed for educational seating
The American National Standards Institute (ANSI) has approved the newly developed safety and performance standard for educational seating: ANSI/BIFMA X6.1-2012—the first of its kind.
| Nov 16, 2012
Green building councils in 62 countries expect 60% of their work to be green by 2015
More than half of the respondents to a survey of members of the Green Building Council in 62 countries expect green projects to comprise 60% of their work by 2015.
| Nov 16, 2012
Voters approve fewer construction ballot measures in 2012 than in 2008
Voters passed fewer ballot measures related to construction projects this year than they did in 2008, according to an analysis by the Associated General Contractors of America.
| Nov 9, 2012
New ANSI/BIFMA standard adds point for lower formaldehyde emissions
The ANSI/BIFMA e3-2012 Furniture Sustainability Standard now includes an additional point for furniture products that meet a new, lower formaldehyde emissions limit.
| Nov 9, 2012
Higher bar on LEED may not be harder to reach
The U.S. Green Building Council expects to substantially revise LEED next year, requiring builders beginning in 2015 to take new and more-detailed steps to get buildings certified.
| Nov 9, 2012
CSI’s sustainability practice group offers webinar on EPA's WaterSense Program
The Construction Specification Institute’s sustainability practice group is offering a webinar Nov. 20 on EPA’s WaterSense Program, featuring Lynn Gilleland, drinking water specialist with EPA’s New England office.