A Troy, N.Y., man has been indicted for allegedly posing as a licensed architect in order to secure work on a half-dozen building projects around the Albany area.
Paul J. Newman of Cohesion Studios Inc. has been charged with defrauding construction companies, business owners, and local governments. The New York Attorney General's office alleges that Newman drafted architectural renderings for more than 100 properties including some for multiple large housing projects.
Newman also allegedly submitted foundation inspections, field reports, energy compliance certificates, and engineer letters to multiple towns and cities falsely certifying that he was a licensed architect. The state attorney general’s office alleges that Newman forged state a Registered Architect stamp or Professional Engineer stamp crafted from registration numbers and signatures borrowed from an actual architect and engineer.
Newman reportedly was assessed a $4,500 fine by the Florida Board of Architecture and Interior Design for doing work on a church project without the proper licensing. Newman is the sole employee of Cohesion Studios, according to prosecutors. Newman allegedly did work in a number of other states and places, including Puerto Rico and Brazil. He could receive a sentence of 15 years in prison if convicted of the most serious charge.
Related Stories
| Nov 20, 2014
Revamped zoning is transforming several New Jersey downtowns
The zoning policy shift could produce the biggest transformation of North New Jersey’s downtowns since the arrival of malls pulled shoppers away from town centers in the 1960s and 1970s.
| Nov 20, 2014
ANSI approves 2015 Wood-Frame Construction Manual standard
The American Wood Council's 2015 “Wood-Frame Construction Manual for One- and Two-Family Dwellings” (WFCM ) has been approved as an American National Standard by the American National Standards Institute (ANSI).
| Nov 17, 2014
AAMA releases new blast hazard mitigation specifications for vertical fenestration systems
This document provides a guide for manufacturers, architects/specifiers, contractors, and building owners for specifying types of systems and services to meet the requirements of blast hazard mitigation.
| Nov 17, 2014
National Roofing Contractors Assn. offers guide for LEED v4 provisions
National Roofing Contractors Association has released LEED v4: Roofing-related Provisions, a document that examines the roofing-related provisions of LEED v4.
| Nov 14, 2014
Army net-zero initiative moving past pilot stage
The U.S Army's ambitious net-zero initiative has had several successful pilot trials, and planners are prepared to expand the nine-part demonstration field to scores of other Army facilities.
| Nov 14, 2014
Former U.S. Treasury Secretary Paulson works to upgrade China’s building codes
Former U.S. Treasury Secretary Hank Paulson is today focused on making new construction in China more energy efficient by working with leaders to upgrade building codes.
| Nov 14, 2014
California aims for 20% reduction in water consumption by 2020
California’s comprehensive new water use plan makes conservation a priority, reinforcing a 2009 plan to reduce statewide per capita water consumption by 20% by 2020.
| Nov 6, 2014
Demountable structural steel could up the ante on sustainability
Demountable structural steel assemblies would be a greener way to make use of steel in the construction industry than recycling.
K-12 Schools | Nov 6, 2014
New Sandy Hook school features could influence security standards
The design of the new Sandy Hook Elementary School on the site of the 2012 Newtown, Conn., school shooting features enhanced security measures—some subtle and others more prominent.
| Nov 6, 2014
OSHA seeking input on electrical standards
The Occupational Safety and Health Administration (OSHA) is reviewing electrical standards for the construction industry to make sure proper safeguards are in place as electrical wiring is being installed and maintained.
