The Metal Construction Association (MCA) has published a new white paper, “Fire Safety of Insulated Metal Wall Panels.”
The document contains detailed information on the efficacy of insulated metal panels (IMPs) for insulation and fire safety requirements in the U.S. and other countries. IMPs are lightweight composite exterior wall and roof panels with two layers of coated thin sheet metal (typically steel or aluminum) wrapped around a rigid foam core to form a stiff composite.
They are tested for fire, structural, thermal transmittance/resistance, foam core properties, water leakage, and air pressure differential. “In some cases, each component of a product can get good fire test results while the entire assembly burns vigorously, and vice versa,” according to a MCA news release. “Therefore, U.S. codes typically require composite assemblies to be fire tested both as a complete assembly and as separate components, particularly foam plastic insulation materials.”
"It's a misconception that non-combustible materials are always preferable to foam plastic materials in exterior claddings,” said Marcelo Hirschler of GBH International, a company specializing in fire test instruments and consulting services, in the release. “IMPs can be used safely in exterior claddings and should continue to be a significant part of building construction.”
Related Stories
Codes and Standards | Nov 29, 2021
FAA seeking design of air traffic control towers of the future
Call for design submissions for safe, efficient structures.
Codes and Standards | Nov 28, 2021
Efficient electric water heaters in multifamily buildings significantly reduce carbon emissions
In buildings with 5+ units, water heating uses more energy than space heating, cooling, or lighting.
Codes and Standards | Nov 23, 2021
New York’s Labor Law Section 240 and how it affects general contractors
The ‘Scaffold Law’ was first enacted by the New York State Legislature in 1885 and is one of the single most-used laws in construction accident cases.
Codes and Standards | Nov 22, 2021
ABC’s Construction Technology Report finds focus on solving operational problems
More than half rely on project management software.
Codes and Standards | Nov 22, 2021
Contractors say 811 utility location system has significant flaws
More than half of firms in survey report damages, near misses because lines were unmarked or marked incorrectly.
Codes and Standards | Nov 19, 2021
Creating net-zero/net-positive buildings is top priority in Green Building Trends 2021 report
Findings also demonstrate compelling business case for building green.
Codes and Standards | Nov 19, 2021
Construction Startup Competition 2021 awards highlight tech innovations
AI-powered software to identify and explain critical issues in construction contracts takes top prize.
Codes and Standards | Nov 18, 2021
Infrastructure bill contains $5 billion for energy efficiency in buildings
Wide range of programs to reduce energy use, improve materials, train workers.
Codes and Standards | Nov 17, 2021
Skanska will provide embodied carbon assessments on all new projects over 53,000 sf
Will use the Embodied Carbon in Construction Calculator it helped create.
Codes and Standards | Nov 16, 2021
NOAA, Univ. of Maryland, and ASCE partner on climate-smart engineering codes, standards
Efforts will account for climate change in future infrastructure design and construction.