flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

New village hall boasts contemporary look, LEED Gold status

Sponsored Content Metals

New village hall boasts contemporary look, LEED Gold status

The building design was inspired by historical elements in the community, and utilizes traditional masonry construction highlighted with a contemporary PAC-CLAD standing seam metal roof.


By Petersen Aluminum | October 19, 2016
Mundelein Village Hall, Mundelein, IL
Architect: Wight & Company
General Contractor: Weston Solutions
Installing contractor: Sullivan Roofing
Profiles: Snap-Clad, Snap-On, PAC-750 Soffit, 7.2 Wall Panels
Color: Zinc

After more than five years of planning within an unusual public-private partnership, a spectacular new village administration building has been completed in Mundelein Village, Ill. The two-story, 32,000 sq. ft. structure, which achieved LEED Gold status, replaces an aging building that served as the town’s headquarters since 1929.

Village officials hired Weston Solutions, a Vernon Hills, Ill. property development company, to oversee construction of the facility on a previously under-utilized industrial site. As part of the deal, Weston Solutions relocated its offices to the new building. The Village will utilize 15,000 sq. ft. on the first floor and Weston Solutions will occupy the second floor.

“The Village would not have moved forward on the project without Weston,” said John Lobaito, village administrator. “Weston’s shared vision made it the ideal partner and achieved our goal of attracting private investment.”

Architectural design was created by Wight & Company in Darien, Ill. The building design was inspired by historical elements in the community, and utilizes traditional masonry construction highlighted with a contemporary PAC-CLAD standing seam metal roof. “The slope of the hillside site made the roof particularly visible,” said Jason Dwyer, project architect. “We chose to use the metal standing seam panels to give the building a nice aesthetic appeal.”

A total of four Petersen products were used on this project. Approximately 14,000 sq. ft. of Petersen standing seam panels in two profiles were installed. Products included 18” wide Snap-Clad panels and 12” wide Snap-On panels, both finished in PAC-CLAD Cool Color Zinc. In addition, 3,300 sq. ft. of Petersen’s 7.2 Panel were used to shield a mechanical pit on top of the building. Finally, 1,000 sq. ft. of PAC-750 soffit panels were used to complete the roof concept.

All Petersen profiles were installed by Sullivan Roofing in Schaumburg, Ill. “This job was a complex mixture of panels and profiles, as well as difficult fabrications,” said Reid Whetham, project manager. “It was a challenging project with straight panels running into a curved valley. Petersen fabricated all of the panels and we custom-made the trim and flashings. We used the Snap-On panels to create the curved areas of the clock tower.” The PAC-CLAD panels were manufactured at Petersen’s plant in Elk Grove Village, Ill.

Sullivan Roofing is a regular user of PAC-CLAD products. “Probably a majority of our business is through Petersen,” Whetham said. “They do a great job with technical support, quality products and competitive pricing.”

The building incorporates numerous sustainable strategies to achieve LEED Gold certification.

Long-recognized as an industry leader in metal standing seam roofing products, Petersen also offers exposed fastener panels, flush panels, composite wall panels and column covers. All provide the well-known Petersen quality and are available in PAC-CLAD® Kynar 500® finish in 38 standard colors on steel and 37 aluminum. Most colors meet LEED, ENERGY STAR and cool roof certification requirements.

For more information on the complete line of Petersen metal products, call 800-PAC-CLAD or visit www.pac-clad.com.

Tags

Related Stories

| Feb 19, 2014

AIA class: The ABCs of IMPs – How to design and build with insulated metal panels

This AIA/CES class offers insight in areas including policies and codes surrounding insulated metal panels, contributions from LEED and tax credits, energy modeling, and business development opportunities available with IMPs. Take this course and earn 1.0 AIA LU/HSW/SD.

| Feb 13, 2014

Why you should start with a builder

They say the best way to eat an elephant is one bite at a time. Expanding your building or constructing a new structure for your business, church, or school isn’t all that different. Attacking it is best done in small, deliberate pieces. 

| Feb 6, 2014

New Hampshire metal building awes visitors

Visitors to the Keene Family YMCA in New Hampshire are often surprised by what they encounter. Liz Coppola calls it the “wow factor.” “Literally, there’s jaw dropping,” says Coppola, director of financial and program development for the Keene Family YMCA.

| Feb 5, 2014

CENTRIA Redefines Coating System with Versacor® Elite

The Versacor Elite Coating System is a premium metal coating system that provides the highest level of protection in the harshest climatic or environmental conditions.

| Jan 30, 2014

What to expect in the metal building industry in 2014

Every year brings changes. This one won’t be any different. We’ll see growth in some areas, declines in others. Here’s a little preview of what we’ll be writing about 2014 when 2015 comes rolling in.

| Jan 28, 2014

White Paper: How metal buildings deliver long-term value to schools

A new white paper from Star Building Systems outlines the benefits of metal buildings for public and private school building projects.

| Jan 23, 2014

Think you can recognize a metal building from the outside?

What looks like brick, stucco or wood on the outside could actually be a metal building. Metal is no longer easily detectable. It’s gotten sneakier visually. And a great example of that is the Madison Square retail center in Norman, Okla.

| Jan 13, 2014

Custom exterior fabricator A. Zahner unveils free façade design software for architects

The web-based tool uses the company's factory floor like "a massive rapid prototype machine,” allowing designers to manipulate designs on the fly based on cost and other factors, according to CEO/President Bill Zahner.

| Dec 16, 2013

Is the metal building industry in a technology shift?

Automation is the future you can’t avoid, though you may try. Even within the metal building industry—which is made up of skilled tradesmen—automation has revolutionized, and will continue revolutionizing, how we work.

| Dec 10, 2013

16 great solutions for architects, engineers, and contractors

From a crowd-funded smart shovel to a why-didn’t-someone-do-this-sooner scheme for managing traffic in public restrooms, these ideas are noteworthy for creative problem-solving. Here are some of the most intriguing innovations the BD+C community has brought to our attention this year.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021