flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

New uses approved for Wyoming schools

Sponsored Content Plumbing

New uses approved for Wyoming schools

Don Haught and his team at Valley Plumbing have been using Viega since the early 2000s. He said the products are quicker to install, and he appreciates the 'much cleaner look than brazing.'


By Viega | April 17, 2018
Viega ProPress approved for specialty gas lines

Viega ProPress approved for specialty gas lines.

To run specialty gas lines for welding-lab classrooms in both a high school and technical college in Wyoming, Valley Plumbing and Heating worked closely with Viega to obtain the approvals necessary.

After consideration and research, Viega approved the uses requested, and the contractor was able to finish the job utilizing Viega ProPress® for copper and stainless steel cleaned and capped piping.

At Thunder Basin High School in Gillette, Wyoming, and Eastern Wyoming College in Torrington, Valley Plumbing was tapped to provide lines for specialty gases, as well as domestic water and hydronics.

However, at the high school, two of the requested uses for gas were not already approved by Viega. Valley Plumbing CCO Don Haught, with the help of Viega District Manager Keith Sayers, went through the approvals process for use of propylene and a carbon dioxide/argon mixture.

The specification required cleaned and capped pipe and fittings for specialty gas. It was essential that no foreign debris or contamination was introduced into the final systems. There were no additional steps taken other than what was done by Viega in the manufacturing process. Fittings are bagged and pipe is capped for delivery and storage. All pipe and fittings remain capped during and after installation.

“We worked with Viega, and they got us the approvals that we asked for to give to the engineers, things that weren’t already preapproved,” Haught said. “I’m a strong proponent of Viega. The Viega solution provides a cleaner, highly professional look and takes significantly less time to install.”

 

Viega ProPress used in welding-lab classroomsViega ProPress used in welding-lab classrooms.

 

Haught and his team at Valley Plumbing have been using Viega since the early 2000s. He said the products are quicker to install, and he appreciates the “much cleaner look than brazing.”

In addition to the newly approved uses, other gases used at Thunder Basin High School include non-medical oxygen, argon and carbon dioxide in the welding-shop classroom. At Eastern Wyoming College, those same three gases are used in the welding area, along with acetylene and compressed air.

The building Valley Plumbing worked on at EWC was a new build, allowing the school to expand its welding labs as well as offer some new programs, including cosmetology and nursing, where training lines (not carrying actual oxygen) were run.

Using Viega products at both locations was a given for Haught. He said that in addition to the reliability of the fittings and the clean lines with installation, he knew he could work with the company to get the specific approvals needed without a hassle.

“We’re always looking for means and methods that make us more efficient and set us apart from the competition,” Haught said. “We like the fact that we’ve been using ProPress for more than 10 years, and many people around here are still not using it much. We always work with the engineers beforehand and try to get it approved before the project bids when possible.”

Viega. Connected in quality.

Click here to read more.

Tags

Related Stories

| Feb 10, 2011

Moen M•Power electronic faucets

At 0.5 gpm, Moen’s M•Power electronic faucets meet the current standards, and offer features that eliminate waste. Improved electronic sensors reduce reflectivity to stop false sensing, and turn off automatically after 30 seconds. Electronics can be installed above or below deck to accommodate different sink styles.

| Jan 21, 2011

Virginia community college completes LEED Silver science building

The new 60,000-sf science building at John Tyler Community College in Midlothian, Va., just earned LEED Silver, the first facility in the Commonwealth’s community college system to earn this recognition. The facility, designed by Burt Hill with Gilbane Building Co. as construction manager, houses an entire floor of laboratory classrooms, plus a new library, student lounge, and bookstore.

| Dec 2, 2010

Alliance for Sustainable Built Environments adds Kohler's Robert Zimmerman to Board of Directors

Robert Zimmerman, Manager – Engineering, Water Conservation & Sustainability at Kohler Co., in Kohler, Wisconsin, has joined the Board of Directors of the Alliance for Sustainable Built Environments. In his position at Kohler Co., Rob is involved with all aspects of water conservation and sustainability related to plumbing fixtures and faucets.

| Nov 9, 2010

U.S. Army steps up requirements for greening building

Cool roofs, solar water heating, and advanced metering are among energy-efficiency elements that will have to be used in new permanent Army buildings in the U.S. and abroad starting in FY 2013. Designs for new construction and major renovations will incorporate sustainable design and development principles contained in ASHRAE 189.1.

| Nov 3, 2010

Park’s green education center a lesson in sustainability

The new Cantigny Outdoor Education Center, located within the 500-acre Cantigny Park in Wheaton, Ill., earned LEED Silver. Designed by DLA Architects, the 3,100-sf multipurpose center will serve patrons of the park’s golf courses, museums, and display garden, one of the largest such gardens in the Midwest.

| Nov 3, 2010

Public works complex gets eco-friendly addition

The renovation and expansion of the public works operations facility in Wilmette, Ill., including a 5,000-sf addition that houses administrative and engineering offices, locker rooms, and a lunch room/meeting room, is seeking LEED Gold certification.

| Nov 3, 2010

Sailing center sets course for energy efficiency, sustainability

The Milwaukee (Wis.) Community Sailing Center’s new facility on Lake Michigan counts a geothermal heating and cooling system among its sustainable features. The facility was designed for the nonprofit instructional sailing organization with energy efficiency and low operating costs in mind.

| Nov 3, 2010

Senior housing will be affordable, sustainable

Horizons at Morgan Hill, a 49-unit affordable senior housing community in Morgan Hill, Calif., was designed by KTGY Group and developed by Urban Housing Communities. The $21.2 million, three-story building will offer 36 one-bed/bath units (773 sf) and 13 two-bed/bath units (1,025 sf) on a 2.6-acre site.

| Nov 3, 2010

Virginia biofuel research center moving along

The Sustainable Energy Technology Center has broken ground in October on the Danville, Va., campus of the Institute for Advanced Learning and Research. The 25,000-sf facility will be used to develop enhanced bio-based fuels, and will house research laboratories, support labs, graduate student research space, and faculty offices. Rainwater harvesting, a vegetated roof, low-VOC and recycled materials, photovoltaic panels, high-efficiency plumbing fixtures and water-saving systems, and LED light fixtures will be deployed. Dewberry served as lead architect, with Lord Aeck & Sargent serving as laboratory designer and sustainability consultant. Perigon Engineering consulted on high-bay process labs. New Atlantic Contracting is building the facility.

| Nov 1, 2010

Vancouver’s former Olympic Village shoots for Gold

The first tenants of the Millennium Water development in Vancouver, B.C., were Olympic athletes competing in the 2010 Winter Games. Now the former Olympic Village, located on a 17-acre brownfield site, is being transformed into a residential neighborhood targeting LEED ND Gold. The buildings are expected to consume 30-70% less energy than comparable structures.

boombox1
boombox2
native1

More In Category


Plumbing

EPA to revise criteria for WaterSense faucets and faucet accessories

The U.S. Environmental Protection Agency (EPA) plans to revise its criteria for faucets and faucet accessories to earn the WaterSense label. The specification launched in 2007; since then, most faucets now sold in the U.S. meet or exceed the current WaterSense maximum flow rate of 1.5 gallons per minute (gpm). 



halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021