flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

New tool helps with selection, installation of heat pump water heaters

Codes and Standards

New tool helps with selection, installation of heat pump water heaters

A new web-based tool by the Department of Energy offers comprehensive information about how to size, select, and install electric heat pump water heaters (HPWHs).


By Peter Fabris, Contributing Editor | August 6, 2024
New tool helps with selection, installation of heat pump water heaters
Screen capture courtesy U.S. Department of Energy

A new web-based tool by the Department of Energy offers comprehensive information about how to size, select, and install electric heat pump water heaters (HPWHs).

HPWHs can be two to four times more efficient than standard units. The benefits are maximized when installers follow best practices and choose the best model and size for the home. The HPWH Installation Tool provides customized guidance for installers, sales associates, and homeowners to help overcome barriers to HPWH adoption.

A HPWH resembles a traditional water heater, but rather than using a gas-fired burner or electrical element to warm the water in the tank, the HPWH extracts heat from the surrounding air. Both HPWHs and traditional water heaters last for about 15 years, but HPWHs require a certain amount of airflow to operate effectively, so the location of the water heater needs to be evaluated. It’s important that HPWHs are sized correctly because an undersized heater could, under certain conditions, result in lukewarm water.

The installation tool also helps determine whether a home’s electrical panel needs to be updated—a common situation when replacing a fossil fuel-fired water heater with a HPWH—or if a HPWH that plugs into a standard 120-volt electrical outlet might be a viable option.

Related Stories

Codes and Standards | May 25, 2016

LEED Dynamic is worth the effort, says commercial real estate executive

San Diego office tower is California’s first office building to receive LEED Dynamic plaque in recertification.  

Codes and Standards | May 24, 2016

Ontario planning to spend $7 billion on wide-ranging climate change plan

Includes financial incentives to retrofit buildings.  

Codes and Standards | May 23, 2016

Facility managers say Internet of Things, analytics will impact maintenance soon

More reliable data needed for optimal results from the technology.  

Codes and Standards | May 20, 2016

Industry leaders call for wider use of bamboo as a building material

Benefits include seismic resiliency and sustainability.  

Codes and Standards | May 19, 2016

Asphalt roofing group publishes updated shingle installation guide

Technical manual provides best practices for roofing professionals.  

Codes and Standards | May 16, 2016

EPA proposes new stormwater discharge regulations for construction sites

Would apply to sites of one or more acres.  

Roofing | May 16, 2016

New guide focused on increasing energy and structural performance with raised-heel trusses

Higher trusses simplify attic ventilation, leave more space for insulation.  

Codes and Standards | May 11, 2016

Current California seismic codes provide safety, resiliency, but needed upgrades present challenge

Los Angeles requires seismic retrofits, but other cities do not.  

Codes and Standards | May 10, 2016

Apple spars with Cupertino, Calif., mayor over strained city infrastructure

Apple’s new ‘spaceship’ campus project prompts questions about whether the company should pay more to offset traffic woes.

Codes and Standards | May 9, 2016

Safety Stand-Down yields proposals to boost construction safety

One example: Gilbane encourages safety harnesses for all working above 6 feet.  

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021