flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

New tool compares HVAC system efficiency

Codes and Standards

New tool compares HVAC system efficiency

IAPMO and Hydronics Industry Alliance unveil BEST to evaluate systems in early design phase.


By Peter Fabris, Contributing Editor | September 28, 2017
A commercial air conditioning unit
A commercial air conditioning unit

A group of commercial manufacturers supported by International Association of Plumbing and Mechanical Officials (IAPMO) and members of the Hydronics Industry Alliance, a Committee of the Radiant Professionals Alliance, have released BEST: The Building Efficiency System Tool.

Available free of charge, BEST allows users to accurately compare different styles of HVAC systems. HVAC systems are all tested to different standards, with various efficiency ratings (EER, IEER, SEER, COP, HSPF), as they are applied in an actual building.

BEST uses the Building Energy Efficiency Ratio (BEER), which takes certified AHRI data, manufacturers’ published performance data at multiple performance points, as-applied correction factors, performance curves for components, pipe and duct required in a typical system. It combines these elements to bridge the gap between certified equipment efficiencies and real-world building system efficiencies.

Users enter the square footage of the building, the number of stories, and the nearest city for local weather data, and then choose up to four types of HVAC systems to compare from more than 30 pre-loaded systems.

BEST features more than 100 default input settings, including system cost per square foot (provided by more than 50 contractors around the U.S.), each of which are adjustable to model any building in any location. BEST outputs estimated installation cost, replacement cost, maintenance cost, monthly energy cost, electrical and fossil fuel consumption costs, total life cycle cost, cumulative life cycle cost by year, system payback time (as compared with other modeled systems), pump and fan HP, system integrated energy efficiency ratio (IEER), coefficient of performance (COP), and more.

Related Stories

| Oct 16, 2014

New York City’s climate plan includes tripling of solar energy

New York City’s plan to cut greenhouse gas emissions by 80% by 2050 includes tripling the amount of solar power generated from city-owned buildings.

| Oct 15, 2014

Drones may soon assist code inspectors for construction in the UAE

The United Arab Emirates’ Ministry of Labour announced that they will start using drones to help inspectors record when construction sites are breaking laws.

| Oct 9, 2014

California authorizes increased use of design-build on state projects

Under the updated law, the Department of General Services and the Department of Corrections and Rehabilitation may use design-build on projects in excess of $1 million. 

| Oct 9, 2014

New York City releases guide for retrofitting buildings against floods

Part of the city’s response to widespread flooding as a result of Hurricane Sandy, the manual offers retrofitting strategies that will enable property owners to reduce the risk of damage and disruption from coastal flooding.

| Oct 9, 2014

Seattle puts restrictions on micro apartments

The Seattle City Council passed new rules that new studio apartments in the city must measure at least 220 sf and contain at least two sinks.

| Oct 9, 2014

Cities get creative with stormwater management

Cities around the world are crafting stormwater management policies that include natural and manmade methods to store and absorb runoff to reduce flooding.

| Oct 2, 2014

Fannie Mae study says affordable rental units more energy efficient than market-rate units

Fannie Mae’s new report on energy usage in the multifamily sector found that affordable properties use 28% less energy per unit and are 29% smaller than market-rate properties.

| Oct 2, 2014

California Energy Commission launches code upgrade process

The California Energy Commission launched the upgrade process to Title 24, the state energy code, last month.

| Oct 2, 2014

Canals to mitigate flooding could be in Boston’s future

The Urban Land Institute held brainstorming sessions over the last several months involving more than 70 engineers, architects, and development and insurance specialists to examine how rising sea levels would affect four representative areas in and around Boston.

| Oct 2, 2014

Los Angeles reverses ban on high-rise slanted roofs and spires

Los Angeles reversed course last month on a regulation that had barred skyscrapers from having slanted roofs or spires.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021